Wind Generator Pro / 24 V / 450 W
SILENT WIND
The generator, developed by sailors for sailors, delivers particularly high performance even at low wind speeds and is suitable for all climate zones. Its stable alignment, even in heavy seas and high-quality, encapsulated, seawater-resistant bearing and the CFRP whisper blades deliver extremely low noise no matter how strong the wind. The new hybrid MPPT charge controller with external Bluetooth interface (Android and iOS compatible) and multi-stage charge is included in the delivery. In addition, a 300 watts (Wp) solar module can be connected. Own consumption amounts to only 20 mA. AGM, gel, wet and lithium batteries can be connected. A large, illuminated LCD display shows all relevant information.
Boost function
An MPP control for small wind generators makes little technical sense. However, with an adjustable boost function it is possible to increase output in low wind conditions, and optimise output in strong winds. The adjustable boost frequency influences the detent torque so that, for example, an earlier charging cycle is guaranteed in light winds.
Bluetooth function
The controller has an illuminated LCD display on which all relevant data can be read, and information about all Bluetooth-capable Android or iOS devices can be displayed. The necessary configuration settings can also be made via the Bluetooth interface.
Stop function
The SILENTWIND Generator Pro automatically stops or significantly reduces the number of revolutions when the batteries are fully charged and when wind speeds are too high. In this way, only a small amount of power goes into the battery and self-discharge is prevented. The wind generator can also be stopped manually via a button beneath the display on the charge controller. An LED indicates the stop function is active.
Features at a glance
3-phase, brushless alternator with powerful magnets
UV-resistant carbon fibre rotor blades
Low noise
External antenna for longer range
Extremely light weight of 6.8 kg
Improved performance
Fast start of the charging process
Higher resistance under strong wind
Universal use at low, medium and high wind speeds
Durable and low maintenance
Supplied with an external hybrid MPPT charge controller with LCD display for all relevant operating data, such as W, A, V, Ah and kWh. A solar panel up to 300 Wp can additionally be connected.
Technical specifications
Generator type
Powerful magnet generator, 3-phase, AC
No. of blades
3
Rotor diameter
1.15 m
Rotor blade material
CFRP - hand laminated
Blade weight
150 g / blade
Nominal voltage
24V DC
Wattage
450 watts
Nominal wind speed
14.5 m / s
Start-up wind speed
2.2 m / s
Charge cycle start
2.5 m / s
Wind tunnel safety test
up to 122 km / h
Speed range
550 - 1700 rpm
Generator total weight
6.8 kg
Tube diameter
48 mm
Note
Supplied with a battery temperature sensor, which is connected to the charge controller via a 2-pin plug.
Unlike previous SILENTWIND hybrid charge controllers, the stop function of the latest WWS04-xx-xx types can only be activated via the "scan" button on the controller itself and no longer via a separate ON-OFF switch.