MAESTRINI

Bronze 2-Way Ball Valve. Free-floating, L type, chrome-plated brass ball, PTFE plastic sealing.  Available in different sizes.

WHALE

High-quality diverter valve to switch on to different bilge pumps or for emptying two different tanks with one pump. Available in two versions: with 25 or 38 mm.

OCEAN TECHNOLOGIES

Low-cost option! Diverter valve for switching a waste hose into either a holding tank or overboard.

Unknown Brand

2-way valve for simultaneous connection of two tanks with a supply line. Can be attached to the flange with two screws (screw hole Ø 7 mm). In neutral position the lever closes all lines.

OCEAN TECHNOLOGIES

2-way valve for waste and bilge pipes. The rotatable connectors allow for various mounting situations. A 1 inch connection nozzle and an extension for the valve shaft are included.

TRUDESIGN

Comfort on board! This 2-way valve with remote control allows you to switch a waste pipe to the holding tank or outboard at the press of a button. Operating voltage: 12-24 V.

TRUDESIGN

2-way connector with extremely high-temperature resistance, durability and low weight. Made of fiberglass reinforced plastic. Designed for high flow rates. Easy mounting.

MAESTRINI

45° brass elbow with internal / external threads. Available in different sizes.

MAESTRINI

45° brass elbow with internal / external threads. Available in different sizes. CR-Brass- An alloy with persistence For decades, brass (MS588 Neq: CW617N) has reliably served on board. its corrosion resistance is decent, when one polishes it with regularity. In underwater applications, MS58 can achieve the standard five years of funtionality, which the EU demands, as long as it does not come in to contact with any electrolytic reactions. Electrolytic reactions can cause dezincification, whereas zinc becomes flushed out of the brass alloy, which in turn allows the remaining copper to become brittle. The solution to this problem has been known for years: DZR brass (dezincification resistant), trade name CR (corrosion resistant) or CW602N. The CR-brass has tiny amounts of heavy metals added in with its copper content at 63%. This specific alloy significantly prolongs the lifespan of board feedthroughs, water inlets and thruhalls. Although CR-brass is rather expensive, we always recommend its use in underwater applications because dezincification can take place in any body of water, even on rivers and lakes. However, this problem is fairly easy to spot. After removing the layers of paint and oxidation residue, a pink discolored material will remain: this is the copper from the original alloy. If you discover this on your vessel, you should replace the affected components.

Unknown Brand

Space-saving solution! This angled thru hull is easy to install and allows straight connection with the hose, thus preventing weak points in the hose. Three sizes available.

MAESTRINI

Free-floating, chrome-plated brass ball. The housing is made of brass, chrome-plated, and the sealing is made of PTFE. Available in different sizes.

Unknown Brand

​Bronze ball valve. To prevent frost damage during winter storage, the water contained in the ball valve can be easily drained through the drainage hole. Thanks to the adjustable stop screw, the rotation direction of the lever can be easily changed so the ball valve can be installed in any position. Due to the high copper content in the alloy, bronze valves and fittings are ideal for permanent underwater use.

TRUDESIGN

These high-quality ball valves are fitted with sensors. Their position (opened or closed) can be monitored and viewed remotely on a display panel, available separately.

MAESTRINI

Ball valve with T-handle control. Available in different sizes.

MAESTRINI

Full bore ball valve. Housing made from brass CR. Available in different sizes.

Unknown Brand

High-quality full-passage ball valve made of highly seawater resistant bronze alloy CC491K. The ball is made of chrome-plated brass CW617N.

TRUDESIGN

These ball valves are suitable for use above and below the water line and are designed to ensure a smooth action and continuous ease of operation over many years. Available in different sizes.

MAESTRINI

Board bushing with hose connection. Made of corrosion resistant brass CR. Available in different versions.

Unknown Brand

Brass ball valve in two sizes: 3/8" and 1/2". Female thread.

MAESTRINI

Gate valves, made out of brass. Available in different sizes.

WHALE

Ball check valves, made of plastic for installation in hoses. Suitable for ½" (13 mm) hoses. Max. pressure: 2.5 bar. Total length. 48 mm.

BAVARIA

Original check valve with connections for hoses with an internal diameter of 25, 32 or 38 mm. 260 mm long.

Unknown Brand

Universal check valve made of plastic. For hose diameters between ½ and 1 inch.

JABSCO

Perfect for long suction lines to avoid dry running the pump. These chack valves can be installed in existing suction lines. Available in different sizes: for 38, 25 or 19 mm hose connections.

BAVARIA

check valve made of glass fiber reinforced polypropylene with integrated nitrile lip for your BAVARIA yacht. Suitable for hoses with a diameter of 25 and 38 mm.

BAVARIA

check valve for 3/4" to 1" hose diameter for your BAVARIA yacht. The check valve is made of glass fiber reinforced polypropylene and comes with a built-in nitrile lip.

BAVARIA

BAVARIA Check Valve EK17653B

MAESTRINI

Check valve with NBR gasket in different sizes. Female thread. Brass

TRUDESIGN

Connection fitting, angled 120 degrees with external thread made of glass fibre reinforced plastic. Suitable for TRUDESIGN valves. Available in different sizes. Properties: Made of nylon composite material for high strength and low weight Resistant to corrosion and electrolysis Chemical resistant (e.g. diesel, petrol and antifouling) UV-resistant High quality surface coating Can be used in a temperature range from -20° C to +110 °C BSP thread - universally compatible with other TruDesign items

TRUDESIGN

High strength and low weight! The high-quality, angled connection fittings from TruDesign are made of glass fiber-reinforced nylon composite and are available in different sizes. Colour: black. Other features: UV-resistant Resistant to diesel, gasoline and antifouling Immune to corrosion and electrolysis Long lifetime BSP and NPS threads (parallel threads) - Universal compatibility Suitable for marine environments from -20 ° C to + 110 ° C