Unknown Brand

Compact bilge pump switch panel to control bilge pumps. The switch has three positions "AUTO - OFF - MAN." and a 15 A circuit breaker. The panel is made of weatherproof and waterproof ABS. AUTO = automatic pump control via the float switch, OFF = bilge pump completely switched off, MAN.= manual activation of the bilge pump. The "AUTO" & "OFF" functions are switching functions. After releasing the rocker switch, the selected switch position is retained. The function "MAN." corresponds to a touch contact. After releasing the rocker switch, the switch automatically changes to the "OFF" position. When the bilge pump is in operation, the LED indicator signals the switch is on or off. In addition, the control panel has a built-in automatic circuit breaker, which prevents a current overload from causing a short circuit or burning out the motor. Delivery contents includes a connection cable, three blade terminals and four screws, as well as instructions. Technical data: Operating voltage: 12/24 V Green control LED for "AUTO", red control LED for "MAN". Current consumption LED @12 V: approx. 3 mA Incl. automatic circuit breaker: 15 A

BEPMARINE

Designed for power boats with two engines for central control of the most important electrical circuits on board. Includes a DC mains switch (100 A) and three separate battery switches (2x starter battery, 1x supply battery) as well as two battery switches for parallel battery connection, allowing the batteries to be operated in parallel if necessary, for example, when the charge level of a starter battery is too low. The five, 15 A circuit breakers are ideal for protecting all consumers. With heavy-duty breaker for anchor winches (150 A). Also supplied with a BEP heavy-duty busbar on the back. With spare positions for additional battery switches and circuit breakers for extras like radio batteries and genset batteries. A complete label set for panel circuit breakers is included. Dimensions: 380 x 463 x 95mm.

SEATEC

Compact and practical bilge pump control panel with integrated fuse. Switching options (ON - OFF - (ON)) "Automatic mode - Off - Manual mode". In manual mode, the red indicator lights up. In automatic mode, the green indicator lights up continuously, when the pump is switched on the red light also comes on. Includes 6x32 mm fuse, seal and screws. Technical data: Dimensions (L x W): 90 x 50 mm Thickness: 2.5mm Installation dimensions (L x W x D): 75 x 36 x 45 mm Hole spacing (L x W): 80 x 40 mm Cable length: Approx. 70 mm 5 A @ 12 V

CARLINGTECH

Matching blank cap for Contra switches installation frame.

CARLINGTECH

Beautifully shaped installation frame for Contura series switches. The frame is suitable for 1 switch.

CARLINGTECH

Beautifully shaped installation frame for Contura series switches. The frame is suitable for 3 switches.

CARLINGTECH

Beautifully shaped installation frame for Contura series switches. The frame is suitable for 6 switches.

CARLINGTECH

Beautifully shaped installation frame for Contura series switches. The end pieces can be fitted together to the optionally available middle pieces, so that almost endless numbers of switches can be arranged. Units per pack: 1 piece.

CARLINGTECH

Beautifully shaped installation frame for Contura series switches. The middle pieces can be fitted together to the optionally available end pieces, so that almost endless numbers of switches can be arranged.

CARLINGTECH

Completely water and dustproof switches, suitable for unlimited outdoor and indoor use. Available in various types.

CARLINGTECH

This dimmer is well suited for instrument and interiour lighting. It provides a switching capacity of 10 amps at 12 volts.

SEATEC

This control panel has 6 illuminated rocker switches with ON/OFF function, a voltmeter, a cigarette lighter and a dual USB port. The control panel is suitable for vehicle electrical systems of 12/24 V. The control panel is constructed of rugged ABS, splash-proof rocker switches, a waterproof gasket to prevent water damage, and a pre-wired cable harness for easy installation. A fuse holder with three 15 A fuses is also integrated, which protects the system from short circuits in an emergency. Info: 12 V / 20 A 24 V / 10 A USB connection: 5 V / 1 A DC 5 V / 2.1 A DC LED colours: Blue Operating temperature: -25° C to +85° C Length: 183 mm Width: 120 mm Connections: +VE(LOAD) = Positive connection to load +VE(BATTERY) = connection to battery + -VE(EARTH) = connection to battery - +VE (LOWER DASH LIGHT) = Optional connection to battery +, for a steady blue light -VE(LOWER DASH LIGHT) = Optional Additional connection to battery -, for a blue continuous light

SEATEC

This control panel has a dual USB connection, a 12 V cigarette lighter socket and 3 illuminated rocker switches with ON/OFF function that can be labeled individually. The switch panel is suitable for vehicle electrical systems of 12-24 V. The panel consists of a splash-proof, reinforced aluminium plate with rocker switches made of ABS. Technical data: 20 A / 12 V 10 A / 24 V Dual USB Input Voltage: 12-24VDC Output voltage: 5 V DC / 3.1 A (2.1 A & 1 A) Cigarette lighter socket: Input Voltage: 12-24VDC Output voltage: 12V DC Material: Plate: aluminium Switch: ABS Protection rating: IP65 Operating temperature: -25° C to +85° C

CARLINGTECH

CONTURA II series switch panels are suitable for CONTURA series waterproof switches by CARLINGSWITCH.

CARLINGTECH

CONTURA II series switch panels are suitable for CONTURA series waterproof switches by CARLINGSWITCH.

BAVARIA

cover frame 1-fold for your BAVARIA. Color: black high-gloss.

BAVARIA

mini current relay for your yacht from BAVARIA. 12 V. Rated switching current: 30A. Contact type: normally open.

SEATEC

Tool for dismantling SEATEC rocker switches in an easy and non-damaging way.

Unknown Brand

​Ideal switches for lighting and smaller appliances. The two switches each have three connections (toggle switches). Front panel made of stainless steel.

Unknown Brand

Ideal switches for lighting and smaller appliances. The switches has three connections (toggle switches). Front panel made of stainless steel.

CARLINGTECH

Foam rubber seal for your CarlingSwitch switch.

QUICK

This compact foot switch is ideal for mounting on deck. The switch is equipped with a protective flap to prevent accidental operation. Dimension: Ø 85 mm, height: 17 mm. Material: stainless steel.

QUICK

This compact foot switch is ideal for mounting on deck. The switch is equipped with a protective flap to prevent accidental operation. Dimension: Ø 85 mm, height: 17 mm. Material: stainless steel.

QUICK

Compact foot switch for mounting on the deck. A protective cover prevents accidental operation. Available with "Up" or "Down" inscription.

QUICK

Compact foot switch for mounting on the deck. A protective cover prevents accidental operation. Available with "Up" or "Down" inscription.

QUICK

Compact foot switch for mounting on the deck. A protective cover prevents accidental operation. Available with "Up" or "Down" inscription.

QUICK

Compact foot switch for mounting on the deck. A protective cover prevents accidental operation. Available with "Up" or "Down" inscription.

BAVARIA

Bavaria socket frame with hinged lid. Protection class: IP44. Color: Black. Dimensions: 60 x 60 mm.

SEATEC

This waterproof (IP67) horn button features a vandalism-proof design and NO/NC changeover contact, plus an integrated blue LED with series resistor. The LED has no internal connection to the switch contacts and can be connected to the dashboard lighting or used as a control LED, for example. Delivery contents include a socket with approx. 14 cm long AWG20 (0.518 mm²) hook-up wires. Technical data: Suitable for 12 & 24 V DC electrical systems Max. 10 A DC Vandalism-secure Socket with 140 mm long AWG20 (0.518 mm²) hook-up wires Required mounting hole: 16 mm Installation depth: approx. 50 mm (incl. socket with connecting cables) Connections: Button: Green wire = C (Common), common contact Yellow wire = NO (normally open), is open when in non-operating state and closes when button is pressed (closer) White wire = NC (normally closed), is closed when in non-operating state and opens when button is pressed (opener) LED Red wire = +12/24 V DC for LED Black wire = NEG battery for LED

BERKER

Range of fixtures and fittings, designed for the highest demands - modern design, easy installation, compact size. Double version.