WHALE

The GUSHER GALLEY self-priming pump features a polycarbonate construction and is ideal for use in the pantry and in combination with sinks in boats and caravans. It has a high flow rate due to its large membrane diameter and double membrane structure. The connecting pieces are individually adjustable. Suitable for fresh and salt water. Please note! Looking at the pump from the front, with the lever facing you, the connection ports on this version of the pump are on the left side. Technical specifications Dimensions (LxWxH): 127 x 92 x 131 mm Pedal length: 104 mm Weight: 0.7 kg Hose connection: 13 mm (½ inch) Maximum suction height: 2 m Maximum discharge head: 3 m Maximum flow capacity: 15 l / min

WHALE

Self-priming pump for easy pumping of salt or sea water. Swivel spout.

WHALE

The GUSHER GALLEY self-priming pump features a polycarbonate construction and is ideal for use in the pantry and in combination with sinks in boats and caravans. It has a high flow rate due to its large diaphragm diameter and double diaphragm structure. The connecting pieces are individually adjustable. Suitable for fresh and salt water. Please note! Looking at the pump from the front, with the lever facing you, the connection ports on this version of the pump are on the right side. Technical specifications Dimensions (LxWxH): 127 x 92 x 131 mm Pedal length: 104 mm Weight: 0.7 kg Hose connection: 13 mm (½ inch) Maximum suction height: 2 m Maximum discharge head: 3 m Maximum flow capacity: 15 l / min

RULE

This Heavy Duty bilge pump from Rule features a rugged housing and a fuel-resistant filter bottom. It has an impressively high pumping capacity and is ideally suited for medium-sized ships. Due to the unit's low power consumption, the pump is extremely economical and is easy on your on-board battery. Power consumption: 4.0 A. Note: The actual delivery rate of a bilge pump may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump. Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 12 V Float switch Optional Hose connection 28 mm Hose connection 1 1/8"

JABSCO

The AMAZON manual bilge pump in the below deck version with a 1" (25 mm) hose connection supports a flow of up to 50 l/min.

JABSCO

The AMAZON manual bilge pump in the below deck version with a 1 1/2" (38 mm) hose connection supports a flow of up to 75 l/min.

JABSCO

The smallest pump in the AMAZON series. Particularly suitable for smaller boats. This pump has an impressive capacity of up to 45 l/min.

JOHNSON PUMP

The AQUA JET WD 5.2 is a five chamber positive displacement diaphragm pump. This pump is the ideal choice for wash down applications as it provides 5 bar pressure, making clean-up faster and easier. Features Quiet operation Smooth flowing Self-priming Integrated pressure switch turns pump on and off automatically when the spray nozzle is opened and closed Dry running without damage Low power consumption Quick disconnect fittings Technical specifications Voltage: 24V Power: 20 l / min Connections: 3/8" BSP thread, 1/2" hose (Ø 13 mm) Max. temperature of the liquid: max. 50 ° C Max. suction lift: 3.0 m Cut in pressure: 3.7 bar Cut off pressure: 5.0 bar Hole spacing: 108 / 63.5 mm Dimensions (LxWxH): 240.2 x 214 x 110 mm Weight: 2.5 kg

JOHNSON PUMP

The WD 5.2 is a five chamber positive displacement diaphragm pump. This pump is the ideal choice for washing down applications, as it generates a pressure of 5 bar, making clean-up faster and easier. Delivery includes the Aqua Jet WD 5.2 pump, an emergency filter, a spray nozzle incl. 7.5 m cable, and fittings. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the spray nozzle is opened and closed. Dry-run damage free Low energy consumption Quick disconnect fittings Technical Data Voltage: 12 V Flow rate: 20 l / min Pump housing: nylon / polyamide Connections: 1/2" BSP thread, 3/4" hose (Ø 19 mm) Max. suction height: 3.0 m Max. liquid temperature: + 50 ° C Length x width: 240.2 x 214 mm Hole spacing: 108 / 63.5 mm Weight (pump): 2.5 kg

JOHNSON PUMP

The AQUA JET WPS 5.2 UNO from JOHNSON is a five-chamber positive displacement diaphragm pump. This pump is the best choice for pressurising water in a closed system such as that found in a boat or in a recreational vehicle. It can easily build the pressure required for a pressurised water supply system. Voltage: 24 V. Features Quiet operation Smooth flowing Self-priming Integrated pressure switches turns pumps on and off automatically when tap is opened or closed Built-in overheating protection Dry running without damage Low power consumption Quick disconnect fittings Technical specifications Voltage: 24V Power: 20 l / min Connections: 1/2" hose Max. liquid temperature: + 50 ° C Max. suction height: 2.5 m Cut in pressure: 1.7 bar Cut off pressure: 2.8 bar Accumulator tank: 2 litre capacity Hole distance: 120/175 mm Dimensions (LxWxH): 365 x 228 x 245 mm Weight: 5.3 kg Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 24 V Hose connection 3/4" Hose connection 19 mm Self-priming Integrated pressure switch Run dry safe

JOHNSON PUMP

Powerful pressurised water pump with a long service life. Thanks to its silent operation and even water flow, this pump is the best solution for your pressurised water system on board. The WPS diaphragm pumps are equipped with a 5-chamber displacement system. Even after switching off, the Johnson Aqua Jet provides upright pressure, and the built-in pressure regulator automatically switches off the pump after reaching the correct amount of pressure. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the tap is opened and closed. Safe to run dry Low energy consumption Quickly disconnect the connections Operating principle When the pump is running, a pressure of up to 2.8 bar / 41 PSI is created. Once this pressure is reached, the pump switches off automatically. Positive-checking drain valves ensure that the pressure is maintained after the pump is switched off. If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a moderate pressure drop, the integrated pressure switch automatically reactivates the pump. Tech specs Voltage: 12 V Output approx. 9 l/min Max. suction lift: 2.0 m Max. liquid temperature: Max + 50 ° C Switch-on pressure: 1.7 bar / 25 PSI Shut-off pressure: 2.8 bar / 41 PSI Connection cable: approx. 1 m Material: Housing: Nylon/polypropylene Valves: EPDM Membrane: Santoprene Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 12 V Self-priming Integrated pressure switch Run dry safe Pressure compensation tank necessary

JOHNSON PUMP

Powerful pressurised water pump with a long service life. Thanks to its silent operation and even water flow, this pump is the best solution for your pressurised water system on board. The WPS diaphragm pumps are equipped with a 5-chamber displacement system. Even after switching off, the Johnson Aqua Jet provides upright pressure, and the built-in pressure regulator automatically switches off the pump after reaching the correct amount of pressure. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the tap is opened and closed. Safe to run dry Low energy consumption Quickly disconnect the connections Operating principle When the pump is running, a pressure of up to 2.8 bar / 41 PSI is created. Once this pressure is reached, the pump switches off automatically. Positive-checking drain valves ensure that the pressure is maintained after the pump is switched off. If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a moderate pressure drop, the integrated pressure switch automatically reactivates the pump. Tech specs Voltage: 12 V Output approx. 11 l/min Max. suction lift: 2.0 m Max. liquid temperature: Max + 50 ° C Switch-on pressure: 1.7 bar / 25 PSI Shut-off pressure: 2.8 bar / 41 PSI Connection cable: approx. 1 m Material: Housing: Nylon/polypropylene Valves: Santoprene/EPDM Membrane: Santoprene Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 12 V Self-priming Integrated pressure switch Run dry safe Pressure compensation tank necessary

JOHNSON PUMP

Powerful pressurised water pump with a long service life. Thanks to its silent operation and even water flow, this pump is the best solution for your pressurised water system on board. The WPS diaphragm pumps are equipped with a 5-chamber displacement system. Even after switching off, the Johnson Aqua Jet provides upright pressure, and the built-in pressure regulator automatically switches off the pump after reaching the correct amount of pressure. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the tap is opened and closed. Safe to run dry Low energy consumption Quickly disconnect the connections Operating principle When the pump is running, a pressure of up to 2.8 bar / 41 PSI is created. Once this pressure is reached, the pump switches off automatically. Positive-checking drain valves ensure that the pressure is maintained after the pump is switched off. If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a moderate pressure drop, the integrated pressure switch automatically reactivates the pump. Tech specs Voltage: 24 V Output approx. 11 l/min Max. suction lift: 2.0 m Max. liquid temperature: Max + 50 ° C Switch-on pressure: 1.7 bar / 25 PSI Shut-off pressure: 2.8 bar / 41 PSI Connection cable: approx. 1 m Material: Housing: Nylon/polypropylene Valves: Santoprene/EPDM Membrane: Santoprene Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 24 V Self-priming Integrated pressure switch Run dry safe Pressure compensation tank necessary

JOHNSON PUMP

Powerful pressurised water pump with a long service life. Thanks to its silent operation and even water flow, this pump is the best solution for your pressurised water system on board. The WPS diaphragm pumps are equipped with a 5-chamber displacement system. Even after switching off, the Johnson Aqua Jet provides upright pressure, and the built-in pressure regulator automatically switches off the pump after reaching the correct amount of pressure. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the tap is opened and closed. Safe to run dry Integrated bypass valve Low energy consumption Quickly disconnect the connections Operating principle When the pump is running, a pressure of up to 2.8 bar / 41 PSI is created. Once this pressure is reached, the pump switches off automatically. Positive-checking drain valves ensure that the pressure is maintained after the pump is switched off. If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a moderate pressure drop, the integrated pressure switch automatically reactivates the pump. Tech specs Voltage: 12 V Output approx. 13 l/min Max. suction lift: 2.0 m Max. liquid temperature: Max + 50 ° C Switch-on pressure: 1.7 bar / 25 PSI Shut-off pressure: 2.8 bar / 41 PSI Connection cable: approx. 1 m Material: Housing: Nylon/polypropylene Valves: Santoprene/EPDM Membrane: Santoprene Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 12 V Self-priming Integrated pressure switch Run dry safe Pressure compensation tank necessary

JOHNSON PUMP

Powerful pressurised water pump with a long service life. Thanks to its silent operation and even water flow, this pump is the best solution for your pressurised water system on board. The WPS diaphragm pumps are equipped with a 5-chamber displacement system. Even after switching off, the Johnson Aqua Jet provides upright pressure, and the built-in pressure regulator automatically switches off the pump after reaching the correct amount of pressure. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the tap is opened and closed. Safe to run dry Integrated bypass valve Low energy consumption Quickly disconnect the connections Operating principle When the pump is running, a pressure of up to 2.8 bar / 41 PSI is created. Once this pressure is reached, the pump switches off automatically. Positive-checking drain valves ensure that the pressure is maintained after the pump is switched off. If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a moderate pressure drop, the integrated pressure switch automatically reactivates the pump. Tech specs Voltage: 24 V Output approx. 13 l/min Max. suction lift: 2.0 m Max. liquid temperature: Max + 50 ° C Switch-on pressure: 1.7 bar / 25 PSI Shut-off pressure: 2.8 bar / 41 PSI Connection cable: approx. 1 m Material: Housing: Nylon/polypropylene Valves: Santoprene/EPDM Membrane: Santoprene Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 24 V Self-priming Integrated pressure switch Run dry safe Pressure compensation tank necessary

JOHNSON PUMP

Powerful pressurised water pump with a long service life. Thanks to its silent operation and even water flow, this pump is the best solution for your pressurised water system on board. The WPS diaphragm pumps are equipped with a 5-chamber displacement system. Even after switching off, the Johnson Aqua Jet provides upright pressure, and the built-in pressure regulator automatically switches off the pump after reaching the correct amount of pressure. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the tap is opened and closed. Safe to run dry Low energy consumption Quickly disconnect the connections Operating principle When the pump is running, a pressure of up to 2.8 bar / 41 PSI is created. Once this pressure is reached, the pump switches off automatically. Positive-checking drain valves ensure that the pressure is maintained after the pump is switched off. If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a moderate pressure drop, the integrated pressure switch automatically reactivates the pump. Tech specs Voltage: 12 V Output approx. 15 l/min Max. suction lift: 2.0 m Max. liquid temperature: Max + 50 ° C Switch-on pressure: 1.7 bar / 25 PSI Shut-off pressure: 2.8 bar / 41 PSI Connection cable: approx. 1 m Material: Housing: Nylon/polypropylene Valves: Santoprene/EPDM Membrane: Santoprene Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 12 V Self-priming Integrated pressure switch Run dry safe Pressure compensation tank necessary

JOHNSON PUMP

Powerful pressurised water pump with a long service life. Thanks to its silent operation and even water flow, this pump is the best solution for your pressurised water system on board. The WPS diaphragm pumps are equipped with a 5-chamber displacement system. Even after switching off, the Johnson Aqua Jet provides upright pressure, and the built-in pressure regulator automatically switches off the pump after reaching the correct amount of pressure. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the tap is opened and closed. Safe to run dry Low energy consumption Quickly disconnect the connections Operating principle When the pump is running, a pressure of up to 2.8 bar / 41 PSI is created. Once this pressure is reached, the pump switches off automatically. Positive-checking drain valves ensure that the pressure is maintained after the pump is switched off. If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a moderate pressure drop, the integrated pressure switch automatically reactivates the pump. Tech specs Voltage: 24 V Output approx. 15 l/min Max. suction lift: 2.0 m Max. liquid temperature: Max + 50 ° C Switch-on pressure: 1.7 bar / 25 PSI Shut-off pressure: 2.8 bar / 41 PSI Connection cable: approx. 1 m Material: Housing: Nylon/polypropylene Valves: Santoprene/EPDM Membrane: Santoprene Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 24 V Self-priming Integrated pressure switch Run dry safe Pressure compensation tank necessary

JOHNSON PUMP

Powerful pressurised water pump with a long service life. Thanks to its silent operation and even water flow, this pump is the best solution for your pressurised water system on board. The WPS diaphragm pumps are equipped with a 5-chamber displacement system. Even after switching off, the Johnson Aqua Jet provides upright pressure, and the built-in pressure regulator automatically switches off the pump after reaching the correct amount of pressure. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the tap is opened and closed. Safe to run dry Low energy consumption Quickly disconnect the connections Operating principle When the pump is running, a pressure of up to 2.8 bar / 41 PSI is created. Once this pressure is reached, the pump switches off automatically. Positive-checking drain valves ensure that the pressure is maintained after the pump is switched off. If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a moderate pressure drop, the integrated pressure switch automatically reactivates the pump. Tech specs Voltage: 12 V Output approx. 20 l/min Max. suction lift: 2.5 m Max. liquid temperature: Max + 50 ° C Switch-on pressure: 1.7 bar / 25 PSI Shut-off pressure: 2.8 bar / 41 PSI Connection cable: approx. 1 m Material: Housing: Nylon/polypropylene Valves: Santoprene/EPDM Membrane: Santoprene Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 12 V Self-priming Integrated pressure switch Run dry safe Pressure compensation tank necessary

JOHNSON PUMP

Powerful pressurised water pump with a long service life. Thanks to its silent operation and even water flow, this pump is the best solution for your pressurised water system on board. The WPS diaphragm pumps are equipped with a 5-chamber displacement system. Even after switching off, the Johnson Aqua Jet provides upright pressure, and the built-in pressure regulator automatically switches off the pump after reaching the correct amount of pressure. Key features Quiet operation Smooth flowing Self-priming Integrated pressure switch automatically turns the pump on and off when the tap is opened and closed. Safe to run dry Low energy consumption Quickly disconnect the connections Operating principle When the pump is running, a pressure of up to 2.8 bar / 41 PSI is created. Once this pressure is reached, the pump switches off automatically. Positive-checking drain valves ensure that the pressure is maintained after the pump is switched off. If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a moderate pressure drop, the integrated pressure switch automatically reactivates the pump. Tech specs Voltage: 24 V Output approx. 20 l/min Max. suction lift: 2.5 m Max. liquid temperature: Max + 50 ° C Switch-on pressure: 1.7 bar / 25 PSI Shut-off pressure: 2.8 bar / 41 PSI Connection cable: approx. 1 m Material: Housing: Nylon/polypropylene Valves: Santoprene/EPDM Membrane: Santoprene Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 24 V Self-priming Integrated pressure switch Run dry safe Pressure compensation tank necessary

MARCO

This self-priming electric pump with filter, pressure controller and check valve switches off at 3 bar and switches on again when it falls below this pressure.

MARCO

This self-priming electric pump with filter, pressure controller and check valve switches off at 2 bar and switches on again when it falls below this pressure.

MARCO

This self-priming electric pump with filter, pressure controller and check valve switches off at 2 bar and switches on again when it falls below this pressure.

JABSCO

Powerful bilge pump. Flexible installation and compact design.

JABSCO

Powerful bilge pump. Flexible installation and compact design.

PLASTIMO

For efficient and more comfortable pumping, the compact and flexible 1083 manual bulge pump from PLASTIMO features a telescopic handle. This means that the handle is always where you need it: on the pump. Simply push the handle in when the pump is not in use. Delivery rate 40.5 litres/minute, in accordance with ISO 15083 (45 strokes per minute, with a negative pressure of 10kPA). The pump weighs just 920 grams. The elbow fittings with valve (for inlet and outlet) included in the delivery contents, result in an extremely compact pump that can be installed in the most confined spaces. The outlets and inlets can be swiveled 360° and therefore adapt perfectly to the pump position in relation to the strainer and through-hull fitting. Technical data: Hose connection: 38 mm (1 1/2") Stroke: 1 litre / stroke Capacity: 40,´.5 l/min Weight: 920 g Length: 330 mm Conforms to ISO 15083 standard

RULE

Powerful bilge pump from RULE. The first choice for sailors and fishermen around the world. The pump is made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents the backflow of water into the bilge. Due to the unit's low consumption, the pump is extremely economical and is easy on your on-board battery. In addition, the pump has an automatic, thermal shutdown, which shuts off the pump immediately when overheating, ensuring additional protection. Characteristics: Flow rate: 69 l / min Power supply: 12V Current consumption: 3.3 A Fuse: 6.0 A Cable length: 750 mm Hose connection: 28 mm Dimensions: 111 x 64 x 74 mm CE / ISO 8849 certification Note: The actual delivery rate of a bilge pump may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump. Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 12 V Float switch Optional Hose connection 28 mm Hose connection 1 1/8"

RULE

Powerful bilge pump from RULE. The first choice for sailors and fishermen around the world. The pump is made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, so that fast and thorough cleaning can be carried out. The check valve prevents backflow of water into the bilge. Due to its low consumption, the pump is extremely economical and is easy on your on-board battery. In addition, the pump has an automatic, thermal shutdown, which shuts off the pump immediately when overheating, thus ensuring additional protection. Characteristics: Flow rate: 69 l / min Power supply: 24V Current consumption: 1.9 A at 24 V Fuse: 6 A Cable length: 750 mm Hose connection: 28 mm Dimensions: 111 x 64 x 74 mm CE / ISO 8849 certification Note: The actual delivery rate of a bilge pump may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump. Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 24 V Float switch Optional Hose connection 28 mm Hose connection 1 1/8"

RULE

Powerful bilge pump from RULE. The first choice for sailors and fishermen around the world. The pump is made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents backflow of water into the bilge. Due to its low consumption, the pump is extremely economical and is easy on your on-board battery. In addition, the pump has an automatic, thermal shutdown, which shuts off the pump immediately when overheating, ensuring additional protection. Characteristics: Flow rate: 23 l / min Power supply: 12V Current consumption: 2.1 A Fuse: 4.0 A Cable length: 750 mm Hose connection: 19mm Dimensions: 64 x 74 x 99 mm CE / ISO 8849 certification Note: The actual delivery rate of a bilge pump may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump. Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 12 V Float switch Optional Hose connection 19 mm Hose connection 3/4"

RULE

Powerful bilge pump from RULE. The first choice for sailors and fishermen around the world. The pump is made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents the backflow of water into the bilge. Due to the unit's low consumption, the pump is extremely economical and is easy on your on-board battery. In addition, the pump has an automatic, thermal shutdown, which shuts off the pump immediately when overheating, ensuring additional protection. Characteristics: Flow rate: 31 l / min Power supply: 12V Current consumption: 1.6 A Fuse: 4.0 A Cable length: 750 mm Hose connection: 19mm Dimensions: 9 x 64 x 74 mm CE / ISO 8849 certification Note: The actual delivery rate of a bilge pump may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump. Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 12 V Float switch Optional Hose connection 19 mm Hose connection 3/4"

RULE

Powerful bilge pump from RULE. The first choice for sailors and fishermen around the world. The pump is made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents the backflow of water into the bilge. Due to the unit's low consumption, the pump is extremely economical and is easy on your on-board battery. In addition, the pump has an automatic, thermal shutdown, which shuts off the pump immediately when overheating, ensuring additional protection. Characteristics: Flow rate: 31 l / min Power supply: 24 V Current consumption: 0.8 A Fuse: 4.0 A Cable length: 750 mm Hose connection: 19mm Dimensions: 9 x 64 x 74 mm CE / ISO 8849 certification Note: The actual delivery rate of a bilge pump may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump. Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Operating voltage 24 V Float switch Optional Hose connection 19 mm Hose connection 3/4"