Unknown Brand

Original replacement impeller from Johnson. Number of blades: 6. Material: nitrile. Original part number: 09-1052S-9. NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

MARCO

Automatic heavy duty float switch with a switching capacity of 14 A. The AS3 features a compact design and click connection for easy installation and maintenance. Switching capacity 12/24 volts, up to 14 A Switching level off/on: 20 / 48 mm Length of connection cable: approx. 90 cm Distance between fixing holes: approx. 50 mm Screw hole diameter: 5 mm Dimensions (LxWxH): 125 x 45 x 60 mm

JOHNSON PUMP

The AS888 float switch from JOHNSON protects electric pumps, is fully automatic and universally compatible. The mechanism is controlled by an internal ball. When the ball is still, the switch remains in the OFF position. As the water level rises, the ball begins to move and the float switch automatically switches on the bilge pump. The switch should always be mounted parallel to the bottom of the bilge, with the float pointing directly to the back. Made of corrosion-resistant materials. Screws are recommended for fixing the switch to the pump. Suitable for 12 and 24 V operation. Max. amps: 15 A @ 12 V. Max. dimensions (LxWxH): 75 x 115 x 98 mm.

ATTWOOD

Water can accumulate in the bilge from time to time for a variety of reasons, be it rain, a leaking valve or a through hull. In order to be able to pump out this water automatically, float switches are required. This Attwood float switch can used to switch a bilge pump to fully automatic operation. The switch features a compact, low-profile design and can be mounted horizontally on any surface up to a 24° angle. An integrated switch activates the pump at a water level of 50mm and deactivates it when the water level falls below 10mm. The housing protects the switch from dirt particles and other debris interference. It also dampens bilge sloshing to reduce pump cycling. Technical specifications Power supply 12 / 24 V Max. power consumption (amps) 12 A @ 12 V 6 A @ 24 V Dimensions (h x w x d) 134 x 99 x 73 mm Hole spacing 73 mm Cable length 900 mm

ATTWOOD

Water can accumulate in the bilge from time to time for a variety of reasons, be it rain, a leaking valve or a through hull. In order to be able to pump out this water automatically, float switches are required. This Attwood float switch can used to switch a bilge pump to fully automatic operation. The switch features a compact, low-profile design and can be mounted horizontally on any surface up to a 24° angle. An integrated switch activates the pump at a water level of 50mm and deactivates it when the water level falls below 10mm. Technical specifications Power supply 12 / 24 V Max. power consumption (amps) 12 A @ 12 V 6 A @ 24 V Dimensions (h x w x d) 108 x 99 x 35 mm Hole spacing 73 mm Cable length 900 mm

JABSCO

This below deck mounting bracket is absolutely necessary when you want to mount the JABSCO WARRIOR hand bilge pump in combination with the deck passage below deck.

JOHNSON PUMP

The Bilge Alert system from JOHNSON uses a Mirus field effect detector cell, which produces a micro-electrical field that detects disruptions caused by water and fluids. When activated the sensor triggers a 100db piezo alarm and an LED light on the control panel. The detector cells are completely sealed, never in contact with the water, do not corrode and are not affected by oil or other foreign debris. The alarm can be armed, tested and disabled with the unique 3-way switch. Characteristics No moving parts Totally sealed No mercury Environmentally friendly Compliant with ISO 8846 Available in 12 V and 24 V

WHALE

Matching clamp ring kit for Whale GULPER 220 pump.

WHALE

This deckplate provides a neat cover over the GUSHER 10 bilge pump.

WHALE

Detachable lever, suitable for the GUSHER URCHIN manual bilge pump.

OCEAN TECHNOLOGIES

This completely waterproof and fully automatic bilge switch works with no moving parts or mechanical switch contacts. It is installed in the positive connection line between the bilge pump and the battery. Built-in electronics measure conductivity between three corrosion-resistant stainless steel sensors and switch the pump on as soon as the liquid level reaches the upper sensor surface. The pump is switched off again with a time delay (after approx. 5 seconds) as soon as the liquid level falls below the lower sensor surface. The delay prevents false starts of the pump and the backflow of water that may still be in the hose to the outboard side. Suitable for all 12 or 24 V submersible pumps or bilge pumps with a maximum current consumption of 20 A (12 V) or 10 A (24 V). Supplied without fixing material. Note: The float switch should be installed so that the water level at the pump and switch is at the same level. The base of the switch must be higher, but never lower, than the base of the pump. Technical data Power supply 12 / 24 V DC Load capacity Max. 20 A @ 12 V Max. 10 A @ 24 V Quiescent current < 10 mA Dimensions (h x w x d) 98 x 24 x 70 mm Width of mounting holes Approx. 7 mm Spacing of mounting holes Approx. 78 mm Connecting cables 2 x 1.5 mm², length approx. 600 mm Electrical connection Red to battery POSITVE Brown to pump positive

Unknown Brand

This float switch is encapsulated in an impact- and corrosion-resistant housing. It automatically activates the pump with a water level of 50 mm.

WHALE

This spare parts kit is suitable for the GUSHER GALLEY MK III drinking water pump from Whale.

WHALE

Original and matching hinged lid with frame for the COMPACT 50 hand pump by Whale. Includes gaiter and screws. Dimensions: Dimensions: 120 x 103 mm Opening diameter: 70 mm Hole spacing: 75 mm Hole diameter: 6.5 mm

JOHNSON PUMP

Replacement impeller made of high-quality MC97 material. Suitable, among others, for the impeller pump F35 from JOHNSON. Excellent for engine cooling. What makes MC97 material so special? MC97 is a rubber compound specially developed by Johnson that offers a number of advantages: Longer service life: Signs of fatigue such as cracking or breakage of the impeller blades are reduced. Improved self-priming: MC97 ensures excellent self-priming so that the pump starts quickly and reliably. Minimised swelling: Compared to conventional materials used for impellers such as neoprene, MC97 absorbs less water, which prevents swelling and ensures the pump's functionality. Stable pressure delivery: The high-quality material ensures significantly longer service life due to constant pressure delivery. Technical Data Material: MC97 Inner diameter: 12 mm Outer diameter: 40mm Width: 19 mm Number of blades: 6 NOTE! An impeller should be checked at least once a year. If your impeller is showing signs of wear, it must be replaced.

JOHNSON PUMP

Replacement impeller made of high-quality MC97 material. Suitable for the impeller pump F7B from JOHNSON. Ideal for engine cooling and for pumping saltwater and freshwater. What makes MC97 material so special? MC97 is a rubber compound specially developed by Johnson that offers a number of advantages: Longer service life: Signs of fatigue such as cracking or breakage of the impeller blades are reduced. Improved self-priming: MC97 ensures excellent self-priming so that the pump starts quickly and reliably. Minimised swelling: Compared to conventional materials used for impellers such as neoprene, MC97 absorbs less water, which prevents swelling and ensures the pump's functionality. Stable pressure delivery: The high-quality material ensures significantly longer service life due to constant pressure delivery. Technical data: Material: MC97 / EPDM Inner Ø: teeth (16 mm) Outer Ø: 65 mm Width: 50.2mm Number of blades: 8 NOTE! An impeller should be checked at least once a year. If your impeller is showing signs of wear, it must be replaced.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 10 Inner Ø: 25 mm Outside Ø: 114 mm Width: 109.8 mm SW 22000 NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 10 Inner Ø: 12.7 mm Outside Ø: 51 mm Width: 22mm JABSCO part number: 18673-0001 NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 10 Inner Ø: 16 mm Outside Ø: 65 mm Width: 50.2 mm JABSCO part number: 17937-0001 NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 12 Inner Ø: 25 mm Outside Ø: 95 mm Width: 102 mm SW 18000 NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 12 Inner Ø: 25 mm Outside Ø: 95 mm Width: 88.5 mm JABSCO 17370-0001B NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 12 Inner Ø: 12.7 mm Outside Ø: 57 mm Width: 19.8 mm Part number: SW.10077 NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications Material: neoprene Inner Ø: 16 mm Outside Ø: 57 mm Width: 31.5 mm Number of blades: 12 NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 3 Inner Ø: 19 mm Outside Ø: 90 mm Width: 25.5 mm EV 25/40/50 PS - JH-OMC 737 NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications Material: neoprene Inner Ø: 8.1 mm Outside Ø: 32 mm Width: 12mm Number of blades: 6 NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications Material: neoprene Inner Ø: 12.7 mm Outside Ø: 51 mm Width: 22mm Number of blades: 6 NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 6 Inner Ø: 15 mm Outside Ø: 65 mm Width: 15mm TOMOS NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 6 Inner Ø: 16.2 mm Outside Ø: 70 mm Width: 22.7 mm OM 389589 50/55/60 hp NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are ideally suited for engine cooling and for pumping salt or fresh water. Technical specifications: Material: neoprene Number of blades: 6 Inner Ø: 10.8 mm Outside Ø: 40 mm Width: 12.6 mm YH 4A 5C NOTE! An impeller should be checked at least once a year. If the impeller shows signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.

Unknown Brand

Neoprene impellers are excellent for engine cooling and for salt or fresh water pumping. Technical data: Material: Neoprene Inner Ø: 12.1 mm Outer Ø: 51 mm Width: 22 mm JABSCO part number: 18653-0001B NOTE! An impeller should be checked at least once a year. If your impeller is showing signs of wear, it must be replaced. This impeller is not an original spare part from the manufacturer. Our impellers are OEM quality and meet the manufacturer's requirements.