MASTERVOLT

This interface enables seamless integration of an AC Master inverter into every master bus network. Suitable for all AC master inverters from 700 W with RJ11 interface. Delivery includes an RJ11 connection cable (1 m), a master bus cable (6 m), a terminating device and operating instructions. Technical specifications Dimensions: 66 x 78 x 32 mm Weight: 0.07 kg Waterproof to IP21

MASTERVOLT

These cables are needed for your Masterbus network, they are suitable for the data traffic and for the power supply of the peripheral devices. Available in different lengths.

MASTERVOLT

With this MasterBus inverter interface, you can integrate your MASS SINE inverter into a MasterBus network. This allows you to monitor and operate the unit via a PC or MasterView device. Protection class: IP21. Dimensions: 66 x 78 x 32 mm. A 6 meter MasterBus cable, a MasterBus Terminator, an interface cable and a user guide are included.

MASTERVOLT

The MasterBus Serial Interface connects conventional Mastervolt products to MasterBus systems. The data is constantly available and it enables configuration, operation and monitoring via MasterView panels. Suitable for Masterlink BTM-III, Mac and Magic DC-DC converters. Technical data: Power supply via MasterBus No Dimensions (HxWxD) 66 x 78 x 32 mm Weight 0.08 kg Protection class IP21 Delivery contents Interface cable, MasterBus cable, MasterBus terminator, user manual

MASTERVOLT

This MasterBus terminating resistor ensures high communication speed and trouble-free operation.

MASTERVOLT

The MasterBus USB interface allows you to view and configure your MasterBus system via your PC. The required MasterAdjust software can be downloaded here. Technical data Power supply via MasterBus Yes, (when your PC is turned on) Dimensions (h x w x d) 66 x 78 x 32 mm Weight: 0.08 kg Level of protection IP21 Included USB cable, MasterBus cable, MasterBus terminator, user manual Note Using an older MASTERBUS USB interface together with new MASTERVOLT devices can lead to errors. In the serial # of the interface, the middle letter should contain at least an "E". If not, it is an old version. Example: Serial # W818A0105 = old version. This should be replaced if you intend to use it with new Mastervolt devices.

MASTERVOLT

This digital shunt is used to manage battery charge and provided accurate battery information such as voltage, current, charge status and remaining time. Thanks to the integrated, programmable system clock, you can automate your system. You can set the generator to start automatically when the batteries are nearly drained. With data storage, you get a complete overview of the electrical system. Communication interfaces: MasterBus, CZone and NMEA2000. For 12, 24 or 48 V on-board voltage. Including temperature sensor, CZone-MasterBus drop cable (1 m), MasterBus terminating resistor and battery cover. Dimensions: 150 x 150 x 65 mm. Weight: 0.7 kg. Our installation tip The MasterShunt is equipped with a busbar inside. If the shunt is installed close to the battery, this busbar may be replaced by either an ANL type, STS or T-fuse. Always make sure the fuse is of the correct value as per the requirements of your installation and the cross-section of the cables used!

VICTRON

Using the MK3-USB interface, you can connect your Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, inverter (only models with a VE.Bus communication port), ECOmulti, EasySolar, or EasyPlus device to a computer. With the Victon Connect app, you can configure, monitor, update and diagnose your Victron device. Various settings can be made, such as setting system frequency, input current limitation, battery capacity, exact end-of-charge voltage, charging current and much more.

VICTRON

Victron VE.Bus cable for connecting Phoenix inverter control panel, VE-Interface MK3-USB and VE.Bus connections to multiple VE.Bus and GX devices. Available in different lengths.

VICTRON

With this adapter cable you can connect a Victron product with a VE.Can port to a NMEA2000 network. Note: Only use the cable fuse if you want to supply the NMEA2000 network with power via the Victron VE.CAN network. If your NMEA2000 network already has a power supply, make sure that the fuse in the adapter cable is not inserted.

VICTRON

With the VE.Direct Bluetooth Smart Dongle you can display the information from your VICTRON battery monitor, BlueSmart solar controller and your Phoenix inverter on your smartphone. The dongle works with the Victron Connect app, which is available free of charge for Android and iOS. You can display battery status, solar module energy and other information wirelessly on your smartphone. Compatible devices: Battery monitor BMV-700, BMV-702, BMV-700H Phoenix inverter All BlueSolar solar controllers except BlueSolar MPPT 70/15, MPPT 150/70 CAN-bus and MPPT 150/85 CAN-bus

VICTRON

The VE.Direct to USB interface connects VE.Direct enabled devices to a computer via USB. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.

VICTRON

Use the VE.Direct cable to connect two VE.Direct Victron devices direclty. The VE.Direct cable is available in different lengths.