RAYMARINE

ClearCruise ™ Augmented Reality (AR) Make intelligent and informed decisions while sailing with Raymarine's Augmented Reality feature. The function enhances awareness by displaying navigation objects directly on a compatible multifunction display in high-definition (HD) quality, giving an HD live video image of the environment. The AR200 module provides a stable and accurate display of AR data. Supplied with camera CAM210. Recognise and react to nearby maritime traffic Identify ships equipped with AIS to evaluate immediate status and risk assessments. Targets are colour-coded. ATTENTION! In order for AIS markings to be displayed with the augmented reality technology, NMEA 2000 compatible AIS hardware must be connected and in operation. Integration via NMEA0183 receivers is not possible for speed reasons. Visualise your waypoints in the real world ClearCruise AR technology visually shows you where your saved waypoints and markers are located. It is also easy to find buoys. NOTE! Only compatible with Raymarine devices with software version: Lighthouse 3.7. The correct software update can be found here . Marine Day and Night Camera CAM210 IP The CAM210 IP Marine Camera is a rugged, high-resolution, network-enabled day and night bullet-shaped video camera suitable for all deck applications. The integrated sun protection ensures maximum visibility and its small size makes it easy to install anywhere on board. Plug & Play connectivity to Raymarine LightHouse II multifunction displays Easy to connect to Power over Ethernet (PoE) or directly to a 12V DC power supply Ultra bright IR LEDs for use in total darkness The digital defogging system improves the recorded image in bad weather conditions (such as smog, fog or smoke) Intelligent infrared technology for clear video images at night in all conditions Specifications - CAM210 CPU 32-bit ARM RISC CPU up to 432 MHz Flash / SDRAM 128 MB / 128 MB Image sensor 2.0 Megapixels 1 / 2.8-inch SONY Progressive Scan, CMOS (Exmor) Total pixels 1952 (H) x 1116 (V) 2.18 megapixels Effective pixels 1944 (H) x 1104 (V) 2.15 megapixels S / N Ratio Bigger than 50dB Minimal lighting 0 lux (IR On) IR Distance 20 m Day Night ICR Lens 6.0 mm megapixel lens Field of view Diagonal = 63.6 ° +/- 3 ° Horizontal = 53.3 ° +/- 3 ° Vertical = 33.1 ° +/- 3 ° Video compression H.264 High [email protected], MJPEG - Image quality: 3 levels Resolution Up to 1920 x 1080 (Full HD) Refresh rate H.264 up to 30fps with 1920x1080 | MJPEG up to 30fps with VGA resolution Video streaming Multi-stream with H.264, MJPEG Adjustable repetition rate CVBR / CBR at H.264 image settings Day & Night, Auto White Balance, Auto Exposure, Privacy Mask, Effects - Color, Sharpness, Mirror / Rotate Vertically Security Password protection, user access log, HTTPS encryption Supported protocols HTTP, HTTPS, FTP, SMTP, UPnP, DNS, DDNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP Smart video Motion detection up to 1920x1080 with 4x3 blocks Power supply DC12V / 1.5A, Power over Ethernet (PoE): 802.3af Input Max. 3,3W, max. 5,3W with IR Net Weight 900 g LED's Electricity, network connection Dimensions 83.8 mm (W) x 155 mm (H) x 178.1 mm (T) with bracket General operating temperature 0 ºC to +40 ºC (+32 ºF to +104 ºF) Storage temperature -10 ° C to + 50 ° C (14 ° F to 122 ° F) Supplied with CAM210 IP Camera, Camera Stand, AR200 Augmented Reality Module, Raynet to RJ45 Adapter, STNG Backbone Cable 1m, STNG Tee, Waterproof Connector, Hardware Kit, CD (English), Mounting Template, Warranty Brochure and Serial Number Labels

RAYMARINE

ClearCruise ™ Augmented Reality (AR) Make intelligent and informed decisions while sailing with Raymarine's Augmented Reality feature. The function enhances awareness by displaying navigation objects directly on a compatible multifunction display in high-definition (HD) quality, giving an HD live video image of the environment. The AR200 module provides a stable and accurate display of AR data. The necessary and compatible Raymarine cameras (CAM-210 or CAM220) are not included. Recognise and react to nearby maritime traffic Identify ships equipped with AIS to evaluate immediate status and risk assessments. Targets are colour-coded. ATTENTION! In order for AIS markings to be displayed with the augmented reality technology, NMEA 2000 compatible AIS hardware must be connected and in operation. Integration via NMEA0183 receivers is not possible for speed reasons. Visualise your waypoints in the real world ClearCruise AR technology visually shows you where your saved waypoints and markers are located. It is also easy to find buoys. NOTE! Only compatible with Raymarine devices with software version: Lighthouse 3.7. The correct software update can be found here .

FLIR

The AX8 thermal surveillance camera monitors vital equipment on your vessel, including engines, exhaust manifolds and shaft bearings. If the temperature rises above preset levels, immediate audible and visual alerts are sent to your Raymarine multifunction display. Problems can thus be detected in good time before you get into trouble on the open sea. An integrated light helps illuminate dark engines. Technical Data Power supply 9 - 36 V DC (12/24 V DC) Power consumption 2 W (continuous) 3.1 W (maximum) Resolution 640 x 480 px (image) 80 x 60 px (IR) Field of view 48 x 37 ° Image modes Thermal image, real image and MSX (infrared image with improved detail display) Automatic image adjustment Yes Image formats Motion JPEG, MPEG, H.264 Measurable temperature range -10 to 150 °C Accuracy +-2 °C or +-2 % of readout value Compatible operating systems LightHouse II Waterproof IP67 Dimensions 54 x 25 x 95 mm Included in delivery AX8 monitoring camera, PoE injector, PoE cable, Raymarine ethernet cable, mounting plate and instruction manual Note Compatible with Raymarine MFDs from LightHouse II version 15.59 and LightHouse 3.

NAVICO

Keep an eye on areas on board or in close proximity to your boat with the IP CAM-1 from NAVICO. The CAM-1 is made of robust and high quality 316 stainless steel, making it excellent for the harshest marine environments, including salt water. With integrated LEDs, the camera is also fully functional at night. Perfect for use as a reverse camera. Simple Setup The camera is preconfigured for compatible multifunction displays (see below) and can be powered via Power Over Ethernet (PoE) or 12V power supply. Add multiple cameras to your boat's network and cycle through different camera views. Further features at a glance Resolution: 1920x1080 LED range: 10 m 1.8mm wide-angle lens Preconfigured multifunction displays B&G Zeus³ B&G Zeus³S SIMRAD NSSevo3 SIMRAD NSSevo3S SIMRAD NSO evo3S SIMRAD NSO evo3S

FLIR

The CAM210 IP Marine Camera is a robust, high-resolution and network-ready day and night video camera that is suitable for all applications on deck. The integrated sun protector ensures maximum visibility and installation is possible anywhere on board due to the unit's compact size. Plug & Play connection to Raymarine Lighthouse II multifunction displays Simply connect to Power-over-Ethernet (PoE) or directly to a 12 V DC power supply Ultra-bright IR LEDs for use in total darkness Digital demisting improves the recorded image in poor weather conditions (such as smog, fog or smoke) Intelligent infrared technology for clear video at night in all conditions Specifications CPU 32-bit ARM RISC CPU up to 432 MHz Flash / SDRAM 128 MB / 128 MB Image sensor 2.0 megapixels 1/2.8 inch SONY Progressive Scan, CMOS (Exmor) Total pixels 1952 (H) x 1116 (V) 2.18 megapixels Effective pixels 1944 (H) x 1104 (V) 2.15 megapixels S/N ratio Higher than 50dB Minimal lighting 0 Lux (IR Ein) IR distance 20 m Day & night ICR Lens 6.0 mm lens Field of view Diagonal = 63.6° +/-3° Horizontal = 53.3° +/-3° Vertical = 33.1° +/-3° Video compression H.264 High [email protected], MJPEG – Picture quality: 3 levels Resolution Up to 1920 x 1080 (Full HD) Refresh Rate H.264 up to 30fps with 1920x1080 | MJPEG up to 30fps with VGA-resolution Video streaming Multi-Stream with H.264, MJPEG Adjustable refresh rate CVBR/CBR at H.264 Picture settings Day & Night, Auto-White Balance, Auto-Exposure, Privacy Mask, Effects - Colours, Sharpness, Mirroring / Vertical Adjustment Security Password Protection, User Access Log, HTTPS-Encryption Supported Protocols HTTP, HTTPS, FTP, SMTP, UPnP, DNS, DDNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP Intelligent Video Motion detection up to 1920x1080 in 4x3 blocks Power supply DC12V/1.5A, PoE (Power over Ethernet): 802.3af Power consumption Max. Max. 3.3W, max. 5.3W with IR Net weight 900 g LEDs Power, Network-Connection Dimensions 83.8 mm (W) x 155 mm (H) x 178.1 mm (D) with bracket General operational temperature 0 ºC to +40 ºC (+32 ºF to +104 ºF) Storage temperature -10° C to +50° C (14° F to 122° F) Included in delivery CAM210 IP camera with 1m RJ45 network cable, camera tripod, waterproof connector, hardware kit, CD (English), mounting template, warranty booklet and serial number labels

FLIR

Ruggedised, High Definition, Day and Night network dome video camera suitable for above or below deck applications. Dome design provides all round selected viability whilst the small frame size allows for rapid installation. Stylised to blend in with your boat’s aesthetic design. Ruggedised, High Definition, Day and Night network dome video camera suitable for above or below deck applications. Dome design provides all round selected viability whilst the small frame size allows for rapid installation. Stylised to blend in with your boat’s aesthetic design. Plug and play integration with Raymarine MFDs running Lighthouse II Power over Ethernet (PoE) or direct 12v DC power supply Simple mechanical frame allows the camera to be locked, rock steady, into position High bright IR LEDs for operation in total darkness The CAM220 IP is compatible with the following Raymarine multifunctional displays: aSeries eS-Series gS-Series cSeries eSeries Please keep in mind that LightHouse Version 14 or higher must be installed in order for the unit to operate. Technical data: System CPU 32 bit ARM9 RISC CPU up to 432 MHz Flash / SDRAM 128 mb / 128 mb Camera Image sensor 2.0 megapixels Total pixels 1952 x 1116 / 2.18 megapixels Lens 3.6 mm wide angle Video Resolution Up to 1920 x 1080 (Full HD) Frame rate Up to 30 fps with 1920 x 1080 Image settings Auto white balance CSS Day & Night BLC Brightness, contrast, sharpness, mirror System Integration Security Password protection, User access log, HTTPS encryption Intelligent Video Motion detection up to 1920x1080 with 12x12 blocks Housing Operating voltage 12 V DC / 1.5 A PoE (Power over Ethernet) Power consumption 5.4 W Net weight 230 g (camera only) LED's Power, Network Connection Dimensions 100 x 80 mm Operating temperature -10 °C to +50 °C Storage temperature -20 °C to +60 °C Delivery contents: Waterproof Coupler, CAM220 Hardware Kit, CAM220 Mounting Template, CD (English), Warranty Booklet, Serial Number Labels

GARMIN

Small and unobtrusive, the GARMIN GC14 marine camera delivers excellent quality images, so you can see more of what’s happening on or around your boat. Even in low light, images are clear (range: <15 m); perfect for monitoring dark engine rooms. Built with a tough, weather-resistant housing. Keep an eye on everything Images can be viewed on a TV, monitor or on compatible multifunction displays that support video input. Use multiple cameras to keep an eye on various areas at the same time. Innovative reverse-image setting Practical reverse-image setting helps to manoeuvre in crowded and narrow harbours. Rotate images on compatible chartplotters 90°, 180° or 270° so you can mount in any orientation. Technical data: Voltage 9 - 16 V DC Power consumption 180 mA @ 12 V Temperature range -15 to +70 °C Position accuracy < 1 m Heading accuracy 2° Compass safe distance 0 mm Cable length 6 m Waterproof IPX7 Material Impact resistant plastic Dimensions (WxDxH) 156 x 334 x 76 mm Weight: 810 g

FLIR

Control M-series daylight and thermal imaging cameras with the JCU-1 joystick kit. With the joystick you can activate and put the system into standby mode, control panning and tilting, zooming and configure system settings through OSD menus. Includes the JCU-1 joystick, a cover, a 7.5 m RJ45 to RJ45 cable and mounting accessories.

FLIR

Ergonomically control M-series daylight and thermal imaging cameras with the JCU-2 joystick kit. With the joystick you can activate and put the system into standby mode, control panning and tilting, zooming and configure system settings through OSD menus. Includes the JCU-2 joystick, a cover, a 7.5 m RJ45 to RJ45 cable and mounting accessories.

FLIR

The M232 pan and tilt IP thermal imaging camera from Flir is the smallest marine thermal camera in the series and features thermal imaging technology to enhance boaters’ overall situational awareness. With excellent resolution, it detects obstacles and targets even in complete darkness, ensuring safe navigation even in the most difficult conditions. . Safe navigation and ClearCruise compatible Thermal imaging improves safety by revealing vessels and obstacles even in complete darkness, helping boaters navigate waters more safely than using radar or spotlight alone. Combined with a multifunction display (available separately), you can also benefit from the advantages of ClearCruise thermal image analysis technology. ClearCruise provides audible and visual alerts when objects such as boats, obstacles or navigation markers are detected in the camera's field of view. Optimised view and zoom function An outstanding resolution of 320 x 240 pixels gives you the best possible view of the entire horizon. The camera also features a 4X continuous zoom. Technical Data Voltage 12 - 24 V DC Current consumption Max. 18 W Operating temperature -25 to +55 °C Storage temperature -30 to +70 °C Resolution 320 x 240 px Detector type 320 × 240 VOx Microbolometer Digital zoom 4x Video refresh rate 9 Hz Field of view 24 x 18° Range performance Person in the water: max. 457 m Vessel: max. 1300 m Pan range 360° Tilt range +110 / -90° Video output H.264 Waterproof IPX6 Dimensions (Ø x H mm 161 x 229 mm Weight: 2.7 kg

RAYMARINE

ClearCruise ™ Augmented Reality (AR) Make intelligent and informed decisions while sailing with Raymarine's Augmented Reality feature. This function enhances awareness by displaying navigation objects directly on a compatible multifunction display in high-definition (HD) quality, giving an HD live video image of the environment. The AR200 module provides a stable and accurate display of AR data. In combination with a compatible IP camera, the AR200 module enables the use of ClearCruise augmented reality on your AXIOM multifunction display. Recognise and react to nearby maritime traffic Identify ships equipped with AIS to evaluate immediate status and risk assessments. Targets are colour-coded. NOTE: In order for AIS markings to be displayed with the augmented reality technology, NMEA 2000 compatible AIS hardware must be connected and in operation. Integration via NMEA0183 receivers is not possible for speed reasons. Visualise your waypoints in the real world ClearCruise AR technology visually shows you where your saved waypoints and markers are located. It is also easy to find buoys NOTE! Only compatible with Raymarine devices with software version: Lighthouse 3.7. The correct software update can be found here. FLIR M232 Thermal Imaging Camera The M232 pan and tilt IP thermal imaging camera from Flir is the smallest marine thermal camera in the series and features thermal imaging technology to enhance boaters’ overall situational awareness. With excellent resolution, it detects obstacles and targets even in complete darkness, ensuring safe navigation even in the most difficult conditions. Safe navigation and ClearCruise compatible Thermal imaging improves safety by revealing vessels and obstacles even in complete darkness, helping boaters navigate waters more safely than using radar or spotlight alone. Combined with a multifunction display (available separately), you can also benefit from the advantages of ClearCruise thermal image analysis technology. ClearCruise provides audible and visual alerts when objects such as boats, obstacles or navigation markers are detected in the camera's field of view. Optimised view and zoom function An outstanding resolution gives you the best possible view of the entire horizon. The camera also features a 4X continuous zoom. Technical Data Voltage 12 - 24 V DC Amperage Max. 18 W Operating temperature -25 to +55 °C Storage temperature -30 to +70 °C Resolution 320 x 240 px Detector type 320 × 240 VOx Microbolometer Digital zoom 4x Video refresh rate 9 Hz Field of view 24 x 18° Range performance Person in the water: max. 457 m Vessel: max. 1300 m Pan range 360° Tilt range +110 / -90° Video output H.264 Waterproof IPX6 Dimensions (Ø x H mm 161 x 229 mm Weight: 2.7 kg

FLIR

Ultra-modern and powerful! The M300C IP lowlight daylight camera is ideally suited for maritime applications and boasts outstanding resolution. With its long-range optical zoom, reliable target identification is guaranteed, enabling stable imaging even in rough sea conditions. This allows targets and hazards to be monitored over long distances. High definition navigation An integrated HD low-light image sensor and wide-angle zoom produces improved target identification even in poor visibility. Steady view in rough seas Biaxial mechanical stabilisation virtually eliminates the effects of pitch, heave, and yaw. Seamless integration Easy integration in navigation and security systems. Technical specifications Voltage 12-24V DC Current consumption <56 W Operating temperature -25 to + 55 ° C Storage temperature -30 to +70 ° C Resolution 1080/30 px (HD) Zoom 30x optical zoom Digital Zoom 12x Adjustment range (pan) 360 ° Adjustment range (tilt) + -90 ° Focal length 129 to 4.3 mm Window defrost Yes Augmented reality compatibility Yes Network video output H.264 Analog video output NTSC PAL (BNC) Waterproof IPX6 Height 311.3 mm Diameter 222.2 mm Weight 6.3 kg

FLIR

The M332 thermal imaging camera is equipped with the latest thermal imaging cores and delivers awareness-enhancing thermal imaging vision for maritime applications. Advanced gyro stabilisation and powerful thermal imaging technology detect obstacles and targets even in total darkness and rough seas. This enables safe navigation even in the most difficult conditions. Comprises a white, robust and weatherproof design. Safe navigation even in poor visibility The thermal imaging technology produces excellent target identification even in complete darkness, dazzling light and light fog. Steady view in rough seas Biaxial mechanical stabilisation virtually eliminates the effects of pitch, heave, and yaw. Seamless integration Easy integration in navigation and security systems. Technical specifications Voltage 12-24V DC Current consumption <56 W Operating temperature -25 to + 55° C Storage temperature -30 to +70° C Detector type 320x256 VOx Microbolometer Digital Zoom 4x Refresh rate 30 Hz Field of view 24 x 18° Focal length 9.1 mm Target recognition range Person in the water: max. 457 m Ships: max. 1300 m Adjustment range (pan) 360 ° Adjustment range (tilt) + -90 ° Window defrost Yes Augmented reality compatibility Yes Network video output H.264 Analog video output NTSC PAL (BNC) Waterproof IPX6 Height 311.3 mm Diameter 222.2 mm Weight 6.3 kg

FLIR

The M364C IP daylight and thermal imaging camera offers high-resolution, long-range surveillance in both bright and dark conditions. Both cameras use multispectral imaging to provide exclusive FLIR Colour Thermal Vision (CTV) technology. The optical zoom ensures reliable target identification and stable imaging even in harsh sea conditions. Colour Thermal Vision combines video camera details with a thermal image and superimposes important colour images that enable captains to clearly identify navigation aids and other ships within the thermal scene. Outstanding imaging performance, intelligent object identification technology and improved gyro stabilisation. This allows targets and hazards to be monitored over long distances. High-resolution navigation The integrated HD low-light image sensor, wide-angle zoom and thermal imaging technology produce excellent target identification even in total darkness, dazzling light and light fog. Steady view in rough seas Biaxial mechanical stabilisation virtually eliminates the effects of pitch, heave, and yaw. ​Seamless integration Easy integration in navigation and security systems. Technical specifications Voltage 12-24V DC Current consumption <56 W Operating temperature -25 to + 55 ° C Storage temperature -30 to +70 ° C Detector type 1 / 2.8 "Exmor R CMOS (Daylight) 640x512 VOx Microbolometer (thermal image) Resolution 1080/30 px (HD) Refresh rate 30 Hz Zoom 30x optical zoom Digital Zoom 12x (daylight) 4x (thermal image) Field of view 63.7 x 35.8° (daylight) 24 x 18° (thermal image) Focal length 129 to 4.3 mm (daylight) 18 mm (thermal image) Target recognition range Person in the water: max. 823 m Ships: max. 2200 m Adjustment range (pan) 360 ° Adjustment range (tilt) + -90 ° Window defrost Yes Augmented reality compatibility Yes Network video output H.264 Analog video output NTSC PAL (BNC) Waterproof IPX6 Height 311.3 mm Diameter 222.2 mm Weight 6.3 kg

FLIR

The M364C LR daylight and thermal imaging camera offers high-resolution, long-range surveillance in both bright and dark conditions. Both cameras use multispectral imaging to provide exclusive FLIR Colour Thermal Vision (CTV) technology. The optical zoom ensures reliable target identification and stable imaging even in harsh sea conditions. Colour Thermal Vision combines video camera details with a thermal image and superimposes important colour images that enable captains to clearly identify navigation aids and other ships within the thermal scene. Outstanding imaging performance, intelligent object identification technology and improved gyro stabilisation. This allows targets and hazards to be monitored over long distances. High-resolution navigation The integrated HD low-light image sensor, wide-angle zoom and thermal imaging technology produce excellent target identification even in total darkness, dazzling light and light fog. Steady view in rough seas Biaxial mechanical stabilisation virtually eliminates the effects of pitch, heave, and yaw. ​Seamless integration Easy integration in navigation and security systems. Technical specifications Voltage 12-24V DC Current consumption <56 W Operating temperature -25 to + 55 ° C Storage temperature -30 to +70 ° C Detector type 1 / 2.8 "Exmor R CMOS (Daylight) 640x512 VOx Microbolometer (thermal image) Resolution 1080/30 px (HD) Refresh rate 30 Hz Zoom 30x optical zoom Digital Zoom 12x (daylight) 4x (thermal image) Field of view 63.7 x 35.8 ° (daylight) 18 x 13.5 ° (thermal image) Focal length 129 to 4.3 mm (daylight) 25 mm (thermal image) Target recognition range Person in the water: max. 1494 m Ships: max. 3900 m Adjustment range (panning) 360 ° Adjustment range (tilt) + -90 ° Window defrost Yes Augmented reality compatibility Yes Network video output H.264 Analog video output NTSC PAL (BNC) Waterproof IPX6 Height 311.3 mm Diameter 222.2 mm Weight 6.3 kg

GARMIN

This cable can be used to extend the Garmin GC™ 12 camera video cable by 15 metres (49.21 feet). The cable has a BNC (male) connector on both ends.