NAVICO

This autopilot bundle from Navico consists of an AP44 control unit, an NAC-2 autopilot computer, a Precision 9 compass and a SteadySteer PUMP-2 hydraulic pump. The PUMP-2 is suitable for hydraulic cylinders with a volume of 80 - 250 cc. The advanced SteadySteer system allows boaters to seamless switch between manual and automatic autopilot control of the vessel. The system reengages the autopilot automatically once manual steering has stopped. Note: The SteadySteer hydraulic flow switch (itm.: 29248) is required to use the SteadySteer function. AP44 Controller The autopilot controller combines Simrad Continuum control technology with a full 4.1" colour screen, intuitive rotary-dial and keypad, and advanced glass helm styling, providing easy access to automated turning patterns, no-drift control, depth contour tracking, and other advanced pilot functions. An automatic compass calibration with the Precision-9 compass simplifies the autopilot setup for even more accurate heading accuracy, and you can also connect your Simrad chartplotter to the AP44 to add navigation via waypoints and routes. (See SVB item no. 81553). NAC-2 Autopilot Computer The NAC-2 autopilot computer is the centre of your Navico autopilot system. Through reflex control algorithms, the NAC-2 steers your yacht in various weather and sea conditions. Designed for boats up to ten metres (35 feet) in length, the NAC-2 is suitable for low-current hydraulic steering pumps, mechanical drive units, or solenoid valves, with a constant current of 8 amps (12 amps max.). In addition, the NAC-2 comes with an NMEA2000 interface for easy connection to course sensors and rudder feedback units. Simple plug and play installation. Input voltage: 12 - 24 volts. Precision-9 Compass The Precision-9 compass delivers accurate heading and rotation speed information to autopilots, radars and navigation systems via NMEA 2000®. The solid-state sensors continuously measure movement and course parameters via nine axes. In addition, the Precision-9 compass also provides information about heeling, rolling and pitching motions on compatible devices. An easily adjustable mounting bracket and connection via a single data cable allow installation on board almost every boat, including installation on the mast of boats with steel hulls. The Precision-9 compass is waterproof (IPX7). (See SVB item no. 81519). RPU-80 Hydraulic Pump The hydraulic pump is suitable for boats up to 10 m (35 feet). Voltage: 12 V Volume: 0.8 litre for cylinder volume: 80 - 250 cc SteadySteer compatible Compatible with NAC-2 Technical data - AP44 control unit Display resolution 320 x 240 pixels Display type TFT LCD Display size 104 mm Operating temperature -25 °C to +65 °C Storage temperature -40 °C to +85 °C Waterproof to IPX7 Dimensions 118 x 37 x 115 mm Weight 0.32 kg Power consumption 2.2 W Power supply NMEA2000 (PoE) Additional info 170 ° viewing angle Technical data - Compass Precision-9 Power consumption 0.4 W Power supply 12 V DC via NMEA2000 Weight 1 kg Dimensions 119 x 36 x 119 mm Waterproof Yes, to IPX7 Operating temperature -25 °C to +65 °C Storage temperature -30° C to +70° C Technical data - Autopilot Computer NAC-2 Power supply 9 - 31.2 V DC Rec. Fuse 20 A Operating temperature -25 to +55° C Storage temperature -30 to +70° C Waterproof IPx5 Connectivity NMEA2000 (Micro-C) Compass safe distance 500 mm Dimensions (WxHxD) 204 x 180 x 57 mm Weight 0.6 kg

NAVICO

This Navico autopilot package consists of an AP44 controller, an NAC-3 autopilot computer, a Precision-9 compass, and a PUMP-3 1.6 litre hydraulic pump. AP44 Controller The autopilot controller combines Simrad Continuum control technology with a full 4.1" colour screen, intuitive rotary-dial and keypad, and advanced glass helm styling, providing easy access to automated turning patterns, no-drift control, depth contour tracking, and other advanced pilot functions. An automatic compass calibration with the Precision-9 compass simplifies the autopilot setup for even more accurate heading accuracy, and you can also connect your Simrad chartplotter to the AP44 to add navigation via waypoints and routes. (See SVB item no. 81553). NAC-3 Autopilot Computer The NAC-3 autopilot computer is the centre of your Navico autopilot system. Through reflex control algorithms, the NAC-3 steers your yacht in various weather and sea conditions. Designed for boats from ten metres (33 feet) in length, the NAC-3 is suitable for low-current hydraulic steering pumps, mechanical drive units, or solenoid valves, with a constant current of 30 amps (50 amps max.). In addition, the NAC-3 comes with an NMEA2000 interface for easy connection to course sensors and rudder feedback units. Simple plug and play installation. Input voltage: 12 - 24 volts. Precision-9 Compass The Precision-9 Compass delivers accurate heading and rotation speed information to autopilots, radars and navigation systems via NMEA 2000®. The solid-state sensors continuously measure movement and course parameters via nine axes. In addition, the Precision-9 compass also provides information about heeling, rolling and pitching motions on compatible devices. An easily adjustable mounting bracket and connection via a single data cable allow installation on board almost every boat, including installation on the mast of boats with steel hulls. The Precision-9 compass is waterproof (IPX7). (See SVB item no. 81519). PUMP-3 hydraulic pump The hydraulic pump is suitable for boats from approx. 15 m (from 50 feet) in length. Voltage: 12 V Capacity: 1.6 litres Current consumption: 3 - 10 A Cylinder volume: 160 - 550 cc Max. pressure: 60 bar Compatible with AC42 and NAC-3 Technical data - AP44 control unit Display resolution 320 x 240 pixels Display type TFT LCD Display size 104 mm Operating temperature -25 °C to +65 °C Storage temperature -40 °C to +85 °C Waterproof to IPX7 Dimensions 118 x 37 x 115 mm Weight: 0.32 kg power consumption 2.2 W Power supply NMEA2000 (PoE) Additional info 170 ° viewing angle Technical data - Compass Precision-9 power consumption 0.4 W Power supply 12 V DC via NMEA2000 Weight: 1 kg Dimensions 119 x 36 x 119 mm Waterproof Yes, to IPX7 Operating temperature -25 °C to +65 °C Storage temperature -30 °C to +70 °C Technical data - Autopilot computer NAC-3 Power supply 12/24 V DC Rec. fuse 30 A Operating temperature -25 to +55 °C Storage temperature -30 to +70 °C Waterproof IPx5 Connectivity NMEA2000 (Micro-C) NMEA0183 (IN/OUT) Compass safe distance 500 mm Dimensions (WxHxD) 204 x 180 x 57 mm Weight: 0.7 kg

RAYMARINE

Perfect for boats with a single outboard and hydraulic steering! With the new Autopilot EVOLUTION from Raymarine, steering your boat becomes easier than before. Difficult calibration is no longer necessary. Due to the intelligent EV-sensor, the autopilot monitors multiple ship movements in all directions and automatically adjusts the steering to match existing sea conditions, without the user having to adjust any other settings. Safe arrival at the planned destination is guaranteed. A further big advantage of the autopilot is flexibility of installation. The device itself can be installed where it is easiest for you to access, while the EV-sensor can be mounted where it makes most sense to you, no matter if above or below deck. There are no restrictions concerning the installation compared to common heading sensors. The core of the sensor is water-protected to IPx6 and IPx7. Components are easily connected via SeaTalk and all cables required are included. The autopilot is NMEA2000 compatible. Included in delivery 0.5ltr Hydraulic Pump p70Rs Autopilot Control Head (incl. SeaTalkng drop cable 0.4 m) ACU-100 Drive Control Unit (incl. SeaTalkng drop cable with open ends at one end 1.0 m) Course sensor EV-1(incl. SeaTalkng drop cable 1.0 m) 1 x SeaTalkng Power Cable 1 x SeaTalkng Backbone cable 5 m) 1 x SeaTalkng Spur Cable (1.0 m) 1 x SeaTalkng 5-way Connector Block 2 x SeaTalkng T-piece Connector 2 x SeaTalkng Terminator Technical data - 0.5 litre hydraulic pump Power supply 12 V For cylinder volume 50 - 110 ccm (3.1 - 6.7 in3) Maximum flow rate (no load) 600 ccm/min (36.6 in3/min) Dimensions (h x w x d) 203 x 103 x 89 mm Technical data - EV-1 course sensor Nominal on-board voltage 12 V (power supply via SeaTalkng) Operating voltage range 10.8 to 15.6 V DC Power consumption (amps) 30 mA Sensors Three-axis digital accelerometer, Three-axis digital compass and three-axis digital angular rate sensor Data connection SeaTalkng Operating temperature -20 to +55 °C Storage temperature -30 to +70° C Relative humidity max. 93% Water rating IPX6 Diameter 140 mm Depth 35 mm (including housing) 95 mm (including bracket) Weight 0.29 kg Technical data - p70Rs control unit Nominal voltage 12 V DC Voltage range 9 to 16 V DC Display Size 3.5" Display Optically integrated, sunlight-readable LCD display Resolution 320 x 240 QVGA Colours 16 bit colour resolution (64,000 colours) Colour palettes Four colour palettes - two day, inverse and red/black LCD brightness 1;200 nit current consumption (watts) 1:6 watts Connectors SeaTalk and SeaTalkng compatible with NMEA2000 marine networks Operating temperature -25º C to 55º C (-13º F to 131º F) Storage temperature -30º C to 70º C (-22º F to 158 ºF) Relative humidity Maximum 93 % Waterproof to IPX6 Compliance Europe: 2004/108/EC | Australia and New Zealand: C-Tick Compliance Level 2 Included in delivery Instructions, seal, display, sun cover, replacement frame, mounting screws

RAYMARINE

Perfect for boats with a single outboard and hydraulic steering! With the new Autopilot EVOLUTION from Raymarine, steering your boat becomes easier than before. Difficult calibration is no longer necessary. Due to the intelligent EV-sensor, the autopilot monitors multiple ship movements in all directions and automatically adjusts the steering to match existing sea conditions, without the user having to adjust any other settings. Safe arrival at the planned destination is guaranteed. A further big advantage of the autopilot is flexibility of installation. The device itself can be installed where it is easiest for you to access, while the EV-sensor can be mounted where it makes most sense to you, no matter if above or below deck. There are no restrictions concerning the installation compared to common heading sensors. The core of the sensor is water-protected to IPx6 and IPx7. Components are easily connected via SeaTalk and all cables required are included. The autopilot is NMEA2000 compatible. Included in delivery 0.5ltr Hydraulic Pump p70s Autopilot Control Head (incl. SeaTalkng drop cable 0.4 m) ACU-100 Drive Control Unit (incl. SeaTalkng drop cable with open ends at one end 1.0 m) Course sensor EV-1(incl. SeaTalkng drop cable 1.0 m) 1 x SeaTalkng Power Cable 1 x SeaTalkng Backbone cable 5 m) 1 x SeaTalkng Spur Cable (1.0 m) 1 x SeaTalkng 5-way Connector Block 2 x SeaTalkng T-piece Connector 2 x SeaTalkng Terminator Technical data - 0.5 litre hydraulic pump Power supply 12 V For cylinder volume 50 - 110 ccm (3.1 - 6.7 in3) Maximum flow rate (no load) 600 ccm/min (36.6 in3/min) Dimensions (h x w x d) 203 x 103 x 89 mm Technical data - EV-1 course sensor Nominal on-board voltage 12 V (power supply via SeaTalkng) Operating voltage range 10.8 to 15.6 V DC Power consumption (amps) 30 mA Sensors Three-axis digital accelerometer, Three-axis digital compass and three-axis digital angular rate sensor Data connection SeaTalkng Operating temperature -20 to +55 °C Storage temperature -30 to +70° C Relative humidity max. 93% Water rating IPX6 Diameter 140 mm Depth 35 mm (including housing) 95 mm (including bracket) Weight 0.29 kg Technical data - p70s control unit Nominal voltage 12 V DC Voltage range 9 to 16 V DC Display Size 3.5" Display Optically integrated, sunlight-readable LCD display Resolution 320 x 240 QVGA Colours 16 bit colour resolution (64,000 colours) Colour palettes Four colour palettes - two day, inverse and red/black LCD brightness 1;200 nit current consumption (watts) 1:6 watts Connectors SeaTalk and SeaTalkng compatible with NMEA2000 marine networks Operating temperature -25º C to 55º C (-13º F to 131º F) Storage temperature -30º C to 70º C (-22º F to 158 ºF) Relative humidity Maximum 93 % Waterproof to IPX6 Compliance Europe: 2004/108/EC | Australia and New Zealand: C-Tick Compliance Level 2 Included in delivery Instructions, seal, display, sun cover, replacement frame, mounting screws

RAYMARINE

Complete autopilot system consisting of the EV1 course sensor, ACU-150 drive unit, p70Rs operating unit, hydraulic pump type 1 and EVOLUTION cable set. This system has been specifically designed to meet the needs of small and medium sized hydraulic vessels with a cylinder capacity of 80 cc and 230 cc and can therefore be installed on many popular motor boats for fishing and cruising. Only suitable for electrical systems with an operating voltage of 12 V DC. Included in delivery Type 1 hydraulic pump p70Rs Autopilot Control Head (incl. SeaTalkng drop cable 0.4 m) ACU-150 Drive Control Unit (incl. SeaTalkng drop cable with open ends at one end 1.0 m) Course sensor EV-1(incl. SeaTalkng drop cable 1.0 m) 1 x SeaTalkng Power Cable 1 x SeaTalkng Backbone cable 5 m) 1 x SeaTalkng Spur Cable (1.0 m) 1 x SeaTalkng 5-way Connector Block 2 x SeaTalkng T-piece Connector 2 x SeaTalkng Terminator Technical data - Type 1 hydraulic pump Power supply 12 V For cylinder volume 80 - 230 ccm (4.9 - 14.0 in3) Maximum flow rate (no load) 1000 ccm/min (61.0 in3/min) Dimensions (h x w x d) 199 x 103 x 89 mm Technical Data EV-1 Nominal on-board voltage 12 V (power supply via SeaTalkng) Operating voltage range 10.8 to 15.6 V DC Power consumption (amps) 30 mA Sensors Three-axis digital accelerometer, Three-axis digital compass and three-axis digital angular rate sensor Data connection SeaTalkng Operating temperature -20 to +55 °C Storage temperature -30 to +70° C Relative humidity max. 93% Water rating IPX6 Diameter 140 mm Depth 35 mm (including housing) 95 mm (including bracket) Weight 0.29 kg Technical Data p70Rs Nominal voltage 12 V DC Voltage range 9 to 16 V DC Display Size 3.5" Display Optically integrated, sunlight-readable LCD display Resolution 320 x 240 QVGA Colours 16 bit colour resolution (64,000 colours) Colour palettes Four colour palettes - two day, inverse and red/black LCD brightness 1;200 nit current consumption (watts) 1:6 watts Connectors SeaTalk and SeaTalkng compatible with NMEA2000 marine networks Operating temperature -25º C to 55º C (-13º F to 131º F) Storage temperature -30º C to 70º C (-22º F to 158 ºF) Relative humidity Maximum 93 % Waterproof to IPX6 Compliance Europe: 2004/108/EC | Australia and New Zealand: C-Tick Compliance Level 2 Included in delivery Instructions, seal, display, sun cover, replacement frame, mounting screws

RAYMARINE

Precise course control, regardless of the speed and sea conditions.

RAYMARINE

The EV200 autopilot delivers precise course control, regardless of the speed and sea conditions.

GARMIN

This Garmin Autopilot Pump Kit has a hydraulic pump that steers the boat by interacting with the hydraulic steering system based on commands from the autopilot system. Works best in combination with the Compact Reactor 40 system. Suitable for hydraulic cylinders with a volume between 98 - 229 cm³. Note: Only compatible with the Garmin Reactor 40 system. Not compatible with Garmin Compact Reactor Set. Included: Hydraulic pump / 1.2 litres Installation material Documents and instructions

GARMIN

The Garmin Autopilot Pump Kit has a hydraulic pump that steers the boat by interacting with the hydraulic steering system based on commands from the autopilot system. Works best in combination with the Compact Reactor 40 system. Suitable for hydraulic cylinders with a volume between 163 - 393 cm³. Note: Only compatible with the Garmin Reactor 40 system. Not compatible with Garmin Compact Reactor Set. Included: Hydraulic pump / 2 litres Installation material Documents and instructions

RAYMARINE

Raymarine's mechanical linear drive system provides enormous thrust, short hard/hard rudder response times and quiet operation. When mounted below deck, the drive acts directly on the rudder. The linear drive unit is connected to the rudder via a tiller arm. Type 2L long Power supply 12 V Maximum displacement 20,000 kg (44,000 lb) Peak thrust 480 kg (1,050 lb) Maximum stroke 400 mm (16") Hardover to hardover time 14 seconds Maximum rudder torque 1,660 nm (14,700 lb.in) Power consumption 48-72 watts Recommended course computer (not included) ACU-400 Note: Please check if a linear drive can be used on your boat.The rudder blade under the hull must be moveable by hand.

RAYMARINE

Raymarine's mechanical linear drive system provides enormous thrust, short hard/hard rudder response times and quiet operation. When mounted below deck, the drive acts directly on the rudder. The linear drive unit is connected to the rudder via a tiller arm. Type 2L long Power supply 24 V Maximum displacement 20,000 kg (44,000 lb) Peak thrust 480 kg (1,050 lb) Maximum stroke 400 mm (16") Hardover to hardover time 14 seconds Maximum rudder torque 1,660 nm (14,700 lb.in) Power consumption 48-72 watts Recommended course computer (not included) ACU-400 Note: Please check if a linear drive can be used on your boat.The rudder blade under the hull must be moveable by hand.

RAYMARINE

Raymarine's mechanical linear drive system provides enormous thrust, short hard/hard rudder response times and quiet operation. When mounted below deck, the drive acts directly on the rudder. The linear drive unit is connected to the rudder via a tiller arm. Type 2S short Power supply 12 V Maximum displacement 15,000 kg (33,000 lb) Peak thrust 480 kg (1,050 lb) Maximum stroke 300 mm (12") Hardover to hardover time 11 seconds Maximum rudder torque 1,190 nm (10,500 lb.in) Power consumption 48-72 watts Recommended course computer (not included) ACU-400 Note: Please check if a linear drive can be used on your boat.The rudder blade under the hull must be moveable by hand.

RAYMARINE

Raymarine's mechanical linear drive system provides enormous thrust, short hard/hard rudder response times and quiet operation. When mounted below deck, the drive acts directly on the rudder. The linear drive unit is connected to the rudder via a tiller arm. Type 2S short Power supply 24 V Maximum displacement 15,000 kg (33,000 lb) Peak thrust 480 kg (1,050 lb) Maximum stroke 300 mm (12") Hardover to hardover time 11 seconds Maximum rudder torque 1,190 nm (10,500 lb.in) Power consumption 48-72 watts Recommended course computer (not included) ACU-400 Note: Please check if a linear drive can be used on your boat.The rudder blade under the hull must be moveable by hand.

RAYMARINE

Mechanical linear drive system by Raymarine with enormous thrust and quiet operation, short hardover to hardover time. Maximum displacement 11,000 kg. Stroke length: 300 mm.

RAYMARINE

The EV 100 tiller pilot is a perfect autopilot for tiller-operated yachts up to 6t displacement. Ideal boat length up to 11 m.

RAYMARINE

Raymarine hydraulic linear drives designed especially for use on larger, mechanically controlled ships with a displacement of more than 20,000 kg.

RAYMARINE

Raymarine hydraulic linear drives designed especially for use on larger, mechanically controlled ships with a displacement of more than 20,000 kg.

RAYMARINE

Raymarine hydraulic linear drives designed especially for use on larger, mechanically controlled ships with a displacement of more than 30,000 kg.

RAYMARINE

Raymarine hydraulic linear drives designed especially for use on larger, mechanically controlled ships with a displacement of more than 30,000 kg.

GARMIN

This Class A electromechanical linear drive unit works with the GHP Marine Autopilot System to control your sailboat or motorboat's steering system precisely and reliably. The unit is designed for larger sailboats with a displacement of up to 12.927 tonnes (28,500 lbs). Technical specifications Drive unit type: Electromechanical linear Compatible autopilot system: Garmin Universal GHP autopilot system Maximum stroke: 303mm (12 inch) Peak thrust: 400 kg (800 lbs) Dimensions (centered): 810(B) x 165(H) x 155(T) mm Power supply: 10-30 V Average clutch current @12V: 0.5 A Average motor current @12V: 1-2 A Operating temperature: -15 °C to +60 °C Garmin Info Center What does an autopilot system comprise of? What components does an autopilot system consist of and what are the individual components used for? This Garmin Support video shows you the key components of an autopilot. Find the right autopilot. This Garmin Support video shows you which autopilot is the right one for your boat and which components you need for your new autopilot system. What can the latest autopilots do? See how to operate an autopilot system and what features the latest technologies offer, explained simply in this Garmin Support video.

GARMIN

This Class B hydraulic-mechanical linear drive unit works with the GHP Marine Autopilot System to control your sailboat or motorboat's steering system precisely and reliably. The unit is designed for larger sailboats with a displacement of up to 21 tonnes (48,400 lbs). Technical data Drive unit type: Hydraulic linear Compatible autopilot system: Garmin Universal GHP autopilot system Maximum stroke: 254mm (10 inch) Peak thrust: 730 kg (1.610 lbs) Dimensions (centered): 810(W) x 120(H) x 225(D) mm Power supply: Controlled via the Garmin ECU Average clutch current @12V: 1.0 A Average motor current @12V: 2-4 A Operating temperature: -15°C to +50°C Garmin Info Center What does an autopilot system comprise of? What components does an autopilot system consist of and what are the individual components used for? This Garmin Support video shows you the key components of an autopilot. Find the right autopilot. This Garmin Support video shows you which autopilot is the right one for your boat and which components you need for your new autopilot system. What can the latest autopilots do? See how to operate an autopilot system and what features the latest technologies offer, explained simply in this Garmin Support video.

GARMIN

This Class B hydraulic-mechanical linear drive unit works with the GHP Marine Autopilot System to control your sailboat or motorboat's steering system precisely and reliably. The unit is designed for larger sailboats with a displacement of up to 35 tonnes (79,000 lbs). Technical specifications Drive unit type: Hydraulic linear Compatible autopilot system: Garmin Universal GHP autopilot system Maximum stroke: 303mm (12 inch) Peak thrust: 1080 kg (2380 lbs) Dimensions (motor): 223(B) x 76(H) x 88(T) mm Dimensions (cylinder, centered): 830(B) x 105(H) x 160(T) mm Dimensions (reservoir): 200(B) x 155(H) x 85(T) mm Power supply: 10-30V Average clutch current @12V: 1.0 A Average motor current @12V: 3-4 A Operating temperature: -15°C to +60°C Garmin Info Center What does an autopilot system comprise of? What components does an autopilot system consist of and what are the individual components used for? This Garmin Support video shows you the key components of an autopilot. Find the right autopilot. This Garmin Support video shows you which autopilot is the right one for your boat and which components you need for your new autopilot system. What can the latest autopilots do? See how to operate an autopilot system and what features the latest technologies offer, explained simply in this Garmin Support video.

NAVICO

The new Lowrance Autopilot Kit is compatible with the High Definition Series (HDS) displays, It provides automatic steering for hydraulic-steer outboard motors. The kit includes the new version of the NAVICO PUMP-1 hydraulic pump. The Outboard Pilot, featuring SmartSteer™ control from your HDS Gen2 or Gen3, will conveniently steer to a heading, waypoint or route. This pack contains everything you need to fit an autopilot to your hydraulic-steer outboard motor, the autopilot lets you focus on fishing activity while keeping the boat on course! With the HDS display, you can easily convert trails to routes – so you can retrace a previous track and get your boat back to the dock from your fishing area. The Lowrance outboard autopilot is suitable for boats up to 30 feet (approx. 9 m) in length. NOTE: The NAC-1 Autopilot Computer is not compatible with B&G multifunction displays. Included within the delivery contents: Autopilot-Computer NAC-1 The brains behind your Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor. Technical Data Power supply 9-16 V DC Load 140 mA + drive unit load Performance Drive: 8 A continuous / 16 A for 1 s Operating temperature -25 to +55 °C Waterproof IPX5 Weight: 0.6 kg PUMP-1 Hydraulic Pump (new version) 0.8L reversible hydraulic pump. Technical specifications Operating voltage Via a NAC-1 course computer (12V DC) Max. Current consumption: 11.5 amps at 52 bar / 750 psi Typical current consumption: 5.5 amps at 10 bar / 150 psi Suitable for boats up to: 10 metres Hydraulic volume: 0.8 litres Operating temperature range: -15° C to +75° C Dimensions: 155mm (L) x 100mm (W) x 85mm (H) Weight: 2.2 kg Max. operating pressure: 55 bar / 800 psi Suitable for cylinders with a volume of: 100cm3 to 180cm3 POINT-1 GPS-Antenna Provides extremely accurate and rapid boat position update, along with heading for accurate boat direction at any speed Technical specifications Voltage 9-16 V DC Load < 100 mA @ 12 V DC Performance Course: +/- 3 ° Horizontal accuracy: 3 m Operating temperature -25 to +60 °C Waterproof IPX7 Weight: 0.14 kg Auto/Standby Button Mounts anywhere on dash and changes Autopilot from STBY to AUTO mode with one press. Technical specifications Operating temperature -25 to +55 °C Waterproof IPX5 Weight: 0,04 kg Hydraulic Fitting Kit Everything you need to connect with your existing hydraulic system – including t-connectors, hoses and oil.

NAVICO

The new Lowrance Autopilot Kit is compatible with the High Definition Series (HDS) displays. It provides automatic steering for hydraulic-steer outboard motors. The kit includes the new version of the NAVICO PUMP-1 hydraulic pump. The new Lowrance Autopilot Kit is compatible with the High Definition Series (HDS) displays. It provides automatic steering for hydraulic-steer outboard motors. The kit includes the new version of the NAVICO PUMP-1 hydraulic pump. The Outboard Pilot, featuring SmartSteer™ control from your HDS Gen2 or Gen3, will conveniently steer to a heading, waypoint or route. This pack contains everything you need to fit an autopilot to your hydraulic-steer outboard motor, the autopilot lets you focus on fishing activity while keeping the boat on course! With the HDS display, you can easily convert trails to routes – so you can retrace a previous track and get your boat back to the dock from your fishing area. The Lowrance outboard autopilot is suitable for boats up to 30 feet (approx. 9 m) in length. NOTE: The NAC-1 Autopilot Computer is not compatible with B&G multifunction displays. Features of the NAVICO Precision-9 compass The Precision-9 Compass delivers accurate heading and rotation speed information to Simrad autopilots, radars and navigation systems via NMEA 2000®. The solid-state sensors continuously measure movement and course parameters via nine axes. In addition, the Precision-9 compass also provides information about heeling, rolling and pitching motions on compatible devices. An easily adjustable mounting bracket and connection via a single data cable allow installation on board almost every boat, including installation on the masts of boats with steel hulls. Key Features Measures heading, rate of turn, heeling, roll and pitch via NMEA 2000® Accurate and reliable semiconductor sensor electronics Heading accuracy of ±2° after calibration Easily adjustable mounting bracket allows bulkhead or up-mast installation IPX7 waterproof to suit up-mast mounting on steel-hulled vessels Easy installation using one single NMEA 2000®-connection A compact sensor measures heading, rate of turn, heeling, roll and pitch Reliable solid-state sensor technology with no moving parts Easy and cost-effective installation Suitable for all hull types, including steel hull vessels, as can be installed on the mast. NMEA 2000® heading and rate of turn information The Simrad Precision-9 compass delivers heading, rate of turn, heel, roll and pitch information to connected devices such as autopilots, radars, sonars, multi-function displays and other navigation systems via NMEA 2000® output. Solid-state sensor technology The Precision 9 compass features a powerful solid-state sensor array based on MEMS technology. This highly precise sensor measures motion on on nine separate axes in order to calculate the most accurate information possible:heading, heel, trim, roll, pitch, yaw, surge and sway. The Precision-9 uses these nine parameters to determine highly accurate heading and rate of turn information and avoids many common limits of conventional electronic fluxgate compasses, with a heading accuracy of +/- 2 degrees after calibration. Mount almost anywhere An easily adjustable mounting bracket allows the Precision-9 to be installed on any vessel, in almost any location The Precision-9 may also be mounted directly to any flat surface and, with an IPX7 waterproof rating, external up-mast installation is possible on steel hulled vessels to avoid magnetic interference. Installation is further facilitated by the NMEA 2000® connection, where power and data are transmitted via a single cable. . Included within the delivery contents: Autopilot-Computer NAC-1 The brains behind your Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor. Technical Data Power supply 9-16 V DC Load 140 mA + drive unit load Performance Drive: 8 A continuous / 16 A for 1 s Operating temperature -25 to +55 °C Waterproof IPX5 Weight: 0.6 kg PUMP-1 Hydraulic Pump (new version) 0.8L reversible hydraulic pump. Technical specifications Operating voltage Via a NAC-1 course computer (12V DC) Max. current consumption: 11.5 amps at 52 bar / 750 psi Typical current consumption: 5.5 amps at 10 bar / 150 psi Suitable for boats up to: 10 metres Hydraulic volume: 0.8 litres Operating temperature range: -15° C to +75° C Dimensions: 155mm (L) x 100mm (W) x 85mm (H) Weight: 2.2 kg Max. operating pressure: 55 bar / 800 psi Suitable for cylinders with a volume of: 100cm3 to 180cm3 Precision 9 Compass sensor Provides extremely accurate and rapid boat position update, along with heading for accurate boat direction at any speed Technical specifications Power consumption 0.4 W Power supply 12 V DC via NMEA2000 Weight: 1 kg Dimensions 119 x 36 x 119 mm Waterproof Yes, to IPX7 Operating temperature -25 °C to +65 °C Storage temperature -30 °C to +70 °C Included in delivery Compass, NMEA2000 T, 4.5 m NMEA2000 network cable Auto/Standby Button Mounts anywhere on dash and changes Autopilot from STBY to AUTO mode with one press. Technical specifications Operating temperature -25 to +55 °C Waterproof IPX5 Weight: 0,04 kg Hydraulic Fitting Kit Everything you need to connect with your existing hydraulic system – including t-connectors, hoses and oil.

RAYMARINE

Pump units for autopilots, available in different versions for different cylinder volumes.

NAVICO

0.8 litre reversible hydraulic pump compatible with SeaStar manual helm pumps up to 1.4 cubic/inch (22.9 cm3) and balanced hydraulic cylinders from 100 cm3 to 180 cm3. Delivery includes 3x ORB-5 to 9/16 UNF fittings. The pump is compatible with Navico SteadySteer. Delivery incl. 3x ORB-5 to 9/16 UNF fittings. Technical specifications: Operating voltage Via a NAC-1 course computer (12V DC) Max. Current consumption: 11.5 amps at 52 bar / 750 psi Typical current consumption: 5.5 amps at 10 bar / 150 psi Suitable for boats up to: 10 metres Hydraulic volume: 0.8 litres Operating temperature range: -15° C to +75° C Dimensions: 155mm (L) x 100mm (W) x 85mm (H) Weight: 2.2 kg Max. Operating pressure: 55 bar / 800 psi Suitable for cylinders with a volume of: 100cm3 to 180cm3

NAVICO

The PUMP-2 reversible hydraulic pump from Navico features an output of 0.8L per minute and is the successor to the popular RPU80 hydraulic pump. Navico hydraulic pumps are characterised by particularly quiet operation. The pump is compatible with Navico SteadySteer. The PUMP-2 is suitable for hydraulic steering of boats up to 10 metres (35 feet) in length or for balanced hydraulic cylinders with a volume of 80 cm3 to 250 cm3. PUMP-2 is part of a Navico NAC-2 autopilot system. Delivery incl. 3x ORB-5 to 9/16 UNF fittings. Technical data Operating voltage Via a NAC-2 course computer (12V DC) Suitable for boats up to: 10 metres (35 feet) Hydraulic volume: 0.8 litres Dimensions: 165mm (L) x 85mm (H) Suitable for cylinders with a volume of: 80cm3 to 250cm3

NAVICO

The PUMP-3 reversible hydraulic pump from Navico features an output of 1.6L per minute and is the successor to the popular RPU160 hydraulic pump. Navico hydraulic pumps are characterised by particularly quiet operation. The pump is compatible with Navico SteadySteer. The PUMP-3 is suitable for hydraulic steering of boats up to 15 metres (50 feet) in length or for balanced hydraulic cylinders with a volume of 160 cm3 to 550 cm3. PUMP-3 is part of a Navico NAC-3 autopilot system. Delivery incl. 3x ORB-5 to 9/16 UNF fittings. Technical data Operating voltage Via a NAC-3 course computer (12V DC) Suitable for boats up to: 15 metres (50 feet) Hydraulic volume: 1.6 litres Dimensions: 168mm (L) x 85mm (H) Suitable for cylinders with a volume of: 160cm3 to 550cm3

NAVICO

The PUMP-4 reversible hydraulic pump from Navico features an output of 3.0L per minute and is characterised by particularly quiet operation. The pump is compatible with Navico SteadySteer. The PUMP-4 is suitable for hydraulic steering of boats up to 21 metres (70 feet) in length or for balanced hydraulic cylinders with a volume of 290 cm3 to 960 cm3. PUMP-4 is part of a Navico NAC-3 autopilot system. Delivery incl. 3x ORB-5 to 9/16 UNF fittings. Technical data Operating voltage Via a NAC-3 course computer (12V DC) Suitable for boats up to: 21 metres (70 feet) Hydraulic volume: 3.0 litres Weight: 3 kg Suitable for cylinders with a volume of: 290cm3 to 960cm3

NAVICO

The PUMP-5 24V reversible hydraulic pump from Navico features an output of 3.0L per minute and is characterised by particularly quiet operation. The pump is compatible with Navico SteadySteer. The PUMP-5 is suitable for hydraulic steering of boats up to 21 metres (70 feet) in length or for balanced hydraulic cylinders with a volume of 290 cm3 to 960 cm3. PUMP-5 is part of a Navico NAC-3 autopilot system. Delivery incl. 3x ORB-5 to 9/16 UNF fittings. Technical data Operating voltage 24V Suitable for boats up to: 21 metres (70 feet) Hydraulic volume: 3.0 litres Weight: 3 kg Suitable for cylinders with a volume of: 290cm3 to 960cm3